Termékek közzététele
Schlüter-DESIGN-NICHE
Schlüter-DESIGN-NICHE
Schlüter-DESIGN-NICHE

    Schlüter-DESIGN-NICHE

    Functionality, flexibility and design in one system – the Schlüter DESIGN NICHE combines all of this. Not only in the bathroom, but everywhere in the house, the prefabricated built-in element opens up a wide range of possibilities for setting design highlights in walls: The rectangular niches are available in three different dimensions and nine attractive TRENDLINE colors and can be installed vertically or horizontally, flush with the surface or protruding from the covering.

    The Schlüter DESIGN NICHE is made of powder-coated aluminum and comes with a height-adjustable frame made of anodized aluminum, a prefabricated KERDI sleeve for a secure seal and the KERDI-FIX assembly adhesive. Installation is quick and easy, and the niche also scores with its low weight and is waterproof. For a system-compliant design, all components of the set are glued with the KERDI-COLL sealing adhesive – this is available separately.

    Specifikáció
    • Installation in Schlüter-KERDI-BOARD:

      1. Cut out by positioning and marking the outer dimensions of the niche and the frame precisely. Only the top layer of the frame has to be cut out. To cut out the niche, cut out the wall completely.

      2. Determination of the above measure. Adjustment ranges from 3 mm to 55 mm selectable. Use of the 5 mm distance grid when using the knurled nut according to the illustration. Stepless adjustment of the distance when turning the knurled nut.

      3. Apply KERDI-FIX to glue the spacers into the recess and then insert and align the spacers.

      4. Apply KERDI-FIX to the spacers to glue the frame, then insert and align the frame.

      Note: For clean processing, it is advisable to protect the outer surfaces of the niche with painter's tape.

      5. Use KERDI-FIX to completely fill the joint between the niche and the frame.

      6. The KERDI sealing sleeve is glued to the frame and the adjacent seal with KERDI-COLL-L. The painter's tape is then removed again. Fresh KERDI-FIX adhesive residues can be removed with spray oil (e.g. WD-40).

      Maintenance:

      DESIGN-NICHE does not require special maintenance or care. Do not use abrasive cleaning agents for sensitive surfaces. All cleaning agents must be free of hydrochloric acid and hydrofluoric acid.

      Keywords: wall shelf, shower shelf, shower niche, wall niche, recessed shelf

    Műszaki specifikáció
    • Egyedi azonosítóschluter-design-niche
    • TermékcsaládTechnology And Design With Profiles
    • TermékcsoportAccessories
    • TípusObjektum (egy termék)
    • Megjelenés dátuma2026-02-04
    • Verziószám1
    Kapcsolódó adatok
    • Elsődleges anyagAlumínium
    Besorolások
    • BIMobject kategóriaHigiénia - Fürdőszoba felszerelések
    • Uniclass 2015 kódSs_40_15_75_78
    • Uniclass 2015 leírásShower area systems
    • CSI MasterFormat 2014 kód10 28 00
    • CSI MasterFormat 2014 névToilet, Bath, and Laundry Accessories
    • OmniClass szám23-15 15 31 13
    • OmniClass névWall Niches

    Termék elérhetősége

    Európa Ázsia Észak-Amerika Afrika Dél-Amerika Óceánia
    Åland
    Afganisztán
    Anguilla
    Algéria
    Argentína
    Amerikai Szamoa
    Albania
    Azerbajdzsán
    Antigua és Barbuda
    Angola
    Bolívia
    Ausztrália
    Andorra
    Bahrein
    Aruba
    Benin
    Brazília
    Cook-szigetek
    Ausztria
    Banglades
    Bahama-szigetek
    Bissau-Guinea
    Chile
    Észak-Mariana-szigetek
    Belgium
    Bhután
    Barbados
    Botswana
    Ecuador
    Fidzsi-szigetek
    Bosznia-Hercegovina
    Brit Indiai-óceáni Terület
    Belize
    Burkina Faso
    Falkland-szigetek
    Francia Polinézia
    Bulgária
    Brunei Szultanátus
    Bermuda
    Burundi
    Francia Guyana
    Guam
    Ciprus
    Christmas Island
    Brit Virgin-szigetek
    Comore-szigetek
    Guyana
    Kelet-Timor
    Csehország
    Dél-Korea
    Caribbean Netherlands
    Csád
    Kolumbia
    Kiribati
    Dánia
    Egyesült Arab Emírségek
    Costa Rica
    Dél-afrikai Köztársaság
    Paraguay
    Marshall-szigetek
    Egyesült Királyság
    Észak-Korea
    Curaçao
    Dél-Szudán
    Peru
    Mikronéziai Szövetségi Államok
    Észak-Macedónia
    Fülöp-szigetek
    Dominikai Közösség
    Dzsibuti
    Suriname
    Nauru
    Észtország
    Grúzia
    Dominikai Köztársaság
    Egyenlítői-Guinea
    Uruguay
    Niue
    Fehéroroszország
    Hongkong
    Egyesült Államok
    Egyiptom
    Venezuela
    Norfolk-sziget
    Feröer-szigetek
    India
    El Salvador
    Elefántcsontpart
    Palau
    Finnország
    Indonézia
    Grenada
    Eritrea
    Pápua Új-Guinea
    Franciaország
    Irak
    Grönland
    Etiópia
    Pitcairn-szigetek
    Gibraltár
    Irán
    Guadeloupe
    Gabon
    Salamon-szigetek
    Görögország
    Izrael
    Guatemala
    Gambia
    Szamoa
    Guernsey
    Japán
    Haiti
    Ghána
    Tokelau
    Hollandia
    Jemen
    Honduras
    Guinea
    Tonga
    Horvátország
    Jordánia
    Jamaica
    Kamerun
    Tuvalu
    Írország
    Kambodzsa
    Kajmán-szigetek
    Kenya
    Új-Kaledónia
    Izland
    Katar
    Kanada
    Kongó
    Új-Zéland
    Jersey
    Kazahsztán
    Kuba
    Kongói Demokratikus Köztársaság
    United States Minor Outlying Islands
    Lengyelország
    Kirgizisztán
    Martinique
    Közép-afrikai Köztársaság
    Vanuatu
    Lettország
    Kókusz-szigetek
    Mexikó
    Lesotho
    Wallis és Futuna
    Liechtenstein
    Kuvait
    Montserrat
    Libéria
    Litvánia
    Laosz
    Nicaragua
    Líbia
    Luxemburg
    Libanon
    Panamaváros
    Madagaszkár
    Magyarország
    Makaó
    Puerto Rico
    Malawi
    Málta
    Malajzia
    Saint Kitts és Nevis
    Mali
    Man-sziget
    Maldív-szigetek
    Saint Lucia
    Marokkó
    Moldova
    Mianmar (Burma)
    Saint Pierre és Miquelon
    Mauritánia
    Monaco
    Mongólia
    Saint Vincent és a Grenadine-szigetek
    Mauritius
    Montenegró
    Nepál
    Saint-Barthélemy
    Mayotte
    Németország
    Omán
    Saint-Martin
    Mozambik
    Norvégia
    Örményország
    Sint Maarten
    Namíbia
    Olaszország
    Pakisztán
    Trinidad és Tobago
    Niger
    Oroszország
    Palesztina
    Turks- és Caicos-szigetek
    Nigéria
    Portugália
    Srí Lanka
    Virgin-szigetek
    Nyugat-Szahara
    Románia
    Szaúd-Arábia
    Réunion
    San Marino
    Szingapúr
    Ruanda
    Spanyolország
    Szíria
    São Tomé és Príncipe
    Svájc
    Tádzsikisztán
    Seychelle-szigetek
    Svalbard and Jan Mayen
    Tajvan
    Sierra Leone
    Svédország
    Thaiföld
    Szenegál
    Szerbia
    Törökország
    Szent Ilona
    Szlovákia
    Türkmenisztán
    Szomália
    Szlovénia
    Üzbegisztán
    Szudán
    Ukrajna
    Vietnam
    Szváziföld
    Vatikán
    Tanzánia
    Togo
    Tunézia
    Uganda
    Zambia
    Zimbabwe
    Zöld-foki Köztársaság
    Common.Footer.ValueProp.Image.AltText

    Design App a Revithez

    Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

    Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

    • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
    • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
    • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből