Trim

WALL MOUNTED

TRIM SQUARE 170 APPLIQUE

S.3152W

1 module LED 3000K 24Vdc DIMMABLE PWM

Rated module luminous flux:: 1056lm

Rated luminaire luminous flux: : 603lm

Rated module power: : 7.9W

Rated luminaire power: : 9W

Luminaire efficacy: : 67lm/W

Voltage (DC):

See the SIMES power supply accessories list on the following pages: 24Vdc

Dimmable: : PWM

Electrical insulation class: : III

Protection class IP: : IP54

Mechanical resistance: : IK09

CE

LUMINAIRE TYPE

Wall mounted luminaire. Bollard fitting ( bollard version ). IP rating IP 54

MATERIAL CHARACTERISTICS

Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process

1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09

LIGHTING PERFORMANCE

Toughened glass diffuser 4mm thick. LOR --. Colour rendering index CRI 90, Colour stability step 3.

INSTALLATION AND MAINTENANCE

Garden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. The wiring of the fixtures must strictly respect the specifications. Where not provided by the fixture loop in /out or through wiring will cause infiltration of humidity and if in contact with the cables this may lead to an accelerated process of oxidation.

WIRING

Hard wired with H05RN-F cable 5m. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 1.8416 Kg Glow Wire test: --

LED module included

TRIM REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.