625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consist of a low lead bronze body and bronze bell housing, shall have separate access covers for the plunger and strainer screen and shall have a bolt to adjust the downstream pressure. The Pressure Reducing Valve shall reduce pressure in both flow and no-flow conditions. The bronze bell housing and access caps shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 600XL or 625XL.

Compliance

ASSE® Listed 1003
IAPMO® Listed
CSA® Certified
City of Los Angeles Approved
Meets the requirements of NSF/ANSI/CAN 61* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)

Features:

Sizes 3/4", 1"
Maximum working water pressure: 300 psi
Maximum working water temperature: 140°F
Reduced pressure range: (standard) 25 psi to 75 psi
Factory preset: 50 psi
Hydrostatic test pressure: 300 psi

Specifikáció

This valve directly replaces a single union competitor model 25AUB. Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring frequent cleaning because of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.
keywords: Wilkins 625XL, 625XL pressure reducing valve, pressure reducing valve with integral strainer, competitor replacement PRV, potable water pressure regulator, commercial water pressure reducing valve, residential pressure regulator, lead-free PRV, 625XL specification sheet

Műszaki specifikáció

Egyedi azonosító625XL
TermékcsaládBuilding Drainage
TermékcsoportWater Hammer Arrestors
TípusObjektum (egy termék)
Megjelenés dátuma2026-08-28
Verziószám1

Linkek

Termékadatlaphttps://www.zurn.com/products/water-control/pressure-reducing-valves/625xl
Szerelési útmutatóhttps://files.zurn.com/care-cleaning-install-warranty-sheets/is625xl.pdf
Műszaki leíráshttps://files.zurn.com/spec-sheets/reg-625xl.pdf

Kapcsolódó adatok

Elsődleges anyagBronz
Tervezés helyeEgyesült Államok

Besorolások

BIMobject kategóriaVízvezeték-szerelés - Szelepek

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek