Pubblica i tuoi prodotti

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

Powder based on special cements and plasticizers with good dispersion capacity and special fillers. Mixed with water, a smooth, self-leveling and pumpable mortar is obtained, which is workable 1/2 hour and passable in 2 hours. The mortar dries and hardens by hydration, without shrinkage, preventing the appearance of cracks.

Voce di capitolato

Mixing ratio: Approx. 4 l. of water for 25 kg. of powder, which corresponds to approximately 1 vol. of water: 4 vol. of dust Density: Approx. 1.5 Kg / l. Density of the fresh mortar: Approx. 2.1 Kg / l. Material consumption: Approx. 1.7 Kg. Powder / m2 / mm. Open time: Approx. 25 minutes (at 20 ° C) Workability time (+ 20 ° C): Approx. 1/2 hour Sealing protection with ARDEX-COAT: After the pouring of the mortar Up to 10 mm: 1 day Up to 30 mm: 3 days Compressive strength: After 1 day: approx 14.0 N / mm2 After 7 days: approx 21.0 N / mm2 After 28 days: approx 32.0 N / mm2 Resistance to the flexotraction: After 1 day: approx 3.8 N / mm2 After 7 days: approx 5.5N / mm2 After 28 days: approx 8.8 N / mm2 Brinell Hardness: After 1 day approx. 63 N / mm2 After 7 days: approx 68 N / mm2 After 28 days: approx 95 N / mm2 Suitable furniture with wheels: Yes Packaging: Sacks of 25 kg. Net Storage: Approx. 12 months in dry places and in its original closed container.

Specifiche tecniche

Rif. UnicoARDEX-IFS-MIX
Famiglia di prodottoSubfloor Preparation
Gruppo di famigliaThicker Layer High Build Self-Leveling Underlayment
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-11-07
Numero di versione1

Links

Link al Prodottohttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html
Descrizione Tecnicahttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html

Relativo a

Materiale principaleMalta
Progettato inSpagna
Prodotto inSpagna

Classificazioni

Categoria BIMobjectPavimentazioni - Fondo
Clasificazione IFCFloor
Nome UNSPSCCarpet or rug underlays
Codice UNSPSC30161719
Codice Uniclass 2015Pr_35_31_06_80
Descrizione Uniclass 2015Smoothing and levelling underlay compounds
Codice CSI MasterFormat 201406 16 26
Titolo CSI MasterFormat 2014Underlayment
Numero OmniClass23-15 17 11 13 11 13
Titolo OmniClassPortland Cement Floor Underlayments
Codice CSI UniFormat IIB1010
Titolo CSI UniFormat IIFloor Construction

Disponibilità Regionale

Europa
Francia
Spagna

Prodotti simili

Immagine per ARDEX PC-T™ Polished Concrete Topping

ARDEX ARDEX PC-T™ Polished Concrete Topping

4.0 (5)

Immagine per ARDEX FL™ Rapid Set, Flexible, Sanded Grout

ARDEX ARDEX FL™ Rapid Set, Flexible, Sanded Grout

$Immagine per ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant$

ARDEX ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant

Immagine per ARDEX K 530™ Decorative Concrete Toping

ARDEX ARDEX K 530™ Decorative Concrete Toping

Immagine per ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

ARDEX ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

Immagine per ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping

ARDEX ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping

Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

Lavora direttamente con gli oggetti BIM accanto a Revit
2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit