Archiviato

ASSA ABLOY DL6030C - Banchina di attracco - labbro variabile (o modulabile?)

Il sistema elettroidraulico ASSA ABLOY 6030C elimina la necessità di diverse altezze di rampa e quindi riduce i costi di costruzione. Si consiglia di equipaggiare ogni area di carico, in cui vi sono frequenti movimenti di mezzi, con almeno un sistema 6030C in modo che i veicoli di tutte le dimensioni possano essere gestiti in modo efficiente. Il labbro telescopico è fornito in lega di alluminio il quale consente alla rampa di essere molto stabile, con conseguenti passaggi più fluidi tra la livellatrice e il pianale del camion. Inoltre offre dei vantaggi ergonomici ed economici grazie alla riduzione dei carichi di schiacciamento per le persone e alla minore usura delle attrezzature di movimentazione.

Voce di capitolato

Combidock extending bridge: • Integrated frame with wall anchors (T-frames) • Electro-hydraulic operation with two lifting cylinders • Lip extension in aluminium, in three sections, each with an extender cylinder • Control unit with selector for "Big Truck" and "City van" operation • "Big Truck" operation: The lip to be extended completely in one piece, total width 2000mm • "City van" operation: Only the central lip section is extended, width of central section 1000mm • Automatic, free floating position • Hydraulic emergency stop in any operating position • Automatic mechanical locking in neutral position • Lateral torsion flexibility • Side plates (toe guards) with warning signs both above and below dock level • Internal wiring, plug connection • Power supply by others • Control Unit Protection Class IP55 • Full compliance with with rules and regulations of the European Standard EN 1398 Dimensions: Dimensions Vertical Working range NL LH A B - inside LH* B - down to LP 3000 800 450 375 550 3500 900 560 360 650 4000 930 590 390 650 * When tail lift is in use Nominal width (NW) 2000mm. Load capacity: • "Big Truck" operation 60kN • "City van" operation 20kN Surface: • Surface painted in standard colour RAL 5010, thickness 80µm Hydraulics: • Standard oil for temperature range -20°C - +60°C Control unit: • Voltage 400V 3-phase, 230V 3-phase , cable harness length 18m • Impulse auto button to put the leveller back in parking position Options: Surface  Surface painted in,RAL 3002, RAL 6005 or RAL 9005 thickness 80µm  Surface painted with coat thickness 160µm  Surface hot-dipped galvanised 80µm Frame  W-Frame (welded to pre-cast frame) Hydraulics  Low temperature oil for temperature range -30°C - +60°C  Bio-oil (environmental protection) Energy & Ergonomics  EPDM gap sealing  Slip protection and noise reduction coating Multifunctional docking control for direct control of dock leveller, dock shelter and door with just one control unit  Operating dock leveller and door

Specifiche tecniche