Archiviato

ASSA ABLOY DL6120STA Stepdock Autodock

The ASSA ABLOY DL6120STA teledock autodock is an externally installed and self-supporting dock leveler that is ideal for applications where there are insufficient installation possibilities within the building. This model is equipped with a telescopic lip system. The telescopic lip precisely bridges the gap between the ramp and the lorry bed.

The ASSA ABLOY DL6120STA teledock autodock is designed to let a truck dock to the ramp with closed tail-gate. Only when the truck is in position the tail-gate should be opened thus ensuring that the temperature chain is not broken. It is as well possible to position a closed container in front of the loading bay any time. The loading/unloading can happen any time afterwards without the need to move the container.

Voce di capitolato

Features
- Sizes - leveler height: 600 mm(front), 850 mm(back)
- Sizes - nominal length*: 2450 mm
- Sizes - step length: 1300 mm
- Sizes - step height: 250 mm
- Sizes - nominal width: 3300, 3500, 3600, 3750 mm
- Vertical working range:
  - Above dock: 0 - 220 mm
  - Below dock: 0 – 620 mm
- Platform tear plate: 8 mm (8/10)
- Surface treatment:
  - Standard: RAL 5010
  - Option: RAL 3002, RAL 6005, RAL 9005, hot dip galvanised
- Control Unit:
  - Leveler control
  - Door control
  - Shelter control
  - Fault & service indicator
*Other sizes are available on request
Performance
- Load capacity: 60kN (6 tonnes)
- Max. point load: 6,5 N / mm² (8 mm tear plate)
- Motor hydraulic unit: 1,5 kW
- Mains supply: 400V 3-phase, 230V 3-phase
- Control unit protection class: IP54
- Allowable oil types:
  - ASSA ABLOY standard hydraulic oil (-20°C - +60°C)
  - ASSA ABLOY low temperature hydraulic oil (-30°C - +60°C)
  - ASSA ABLOY bio hydraulic oil (-20°C - + 60°C)
- Magnetic valves: 24V/DC 18W S1
- Surface treatment paint class 1: 80 μm C2 M acc. DIN EN ISO 12944-2
- Surface treatment paint class 3: 160 μm C3 M acc. DIN EN ISO 12944-2
- Surface treatment galvanised: Hot dip galvanised 80 µm Corrosive category C4 & C5-I M acc. DIN EN ISO 12944-2