Archiviato

PNV-125-LF - Proton Digital Mixing Valve

The Nuleus Proton Digitally Controlled mixing valve from Leonard Valve Company is a simple plug-in water temperature control valve. It is self balancing, incorporates the industry's only self cleaning feature and holds temperature to +/-2˚F. Integral check valves are standard on all models, and it has simple setup and simple error coding. Two different sizes are available @ 1" outlet and 1.25" outlet for specific project flow needs. The Nucleus Proton is both ASSE and CSA certified. The electronics are UL Certified and the valve meets the requirements of NSF 372 (Low Lead Content). Options are available for IOT (MODBUS ID WI-FI Gateway) which allows for remote temperature monitoring through the cloud or a building management system.

Voce di capitolato

Digital Mixing Valve with 1” inlet, 1.25” Outlet connections with integral stop/check valves 1.25" inlets, 1.5" outlet (31.75mm X 38.1mm) 0.25 GPM** (.95 L/min) minimum flow capacity Controls water temperature to ± 2°F in accordance with ASSE 1017 Controls water temperature to ± 2°F at the NV-150-LF during times of low/no system demand Automatic Hot/Cold Water shutoff upon cold/ hot water inlet supply failure User programmable for on-site configuration, high-temperature sanitization mode, and high/ low temperature alarm User adjustable settings at the controller or remotely through a Building Automation System/ Building Management System User programmable set point range between 65°F and 180°F Displays outlet temperature with options to display additional temperature points, pressure, and flow UL Listed 120V plug in power supply with 6’ cord Factory assembled and tested **NOTE: The valve will maintain temperature with 0.25 GPM flow from the domestic hot water loop when properly installed near the hot water source with a continuously operating recirculation pump. OPTIONS: ____SUFFIX IF-RTS – Inlet Pressure and Temperature Sensors and Fittings with Return Temperature Sensor

Specifiche tecniche