Pubblica i tuoi prodotti
Commercial Tankless System - Wall Mounted

Commercial Tankless System - Wall Mounted

Rheem® Commercial Tankless System

This custom-built tankless solution arrives on the jobsite factory-assembled with single point connections, including:

  • RTGH-CM95 Condensing Tankless Water Heaters
  • Factory installed system control manifold
  • Pre-sized water and gas manifold
  • Electrical wiring
  • Condensate lines

 Configurations

  •  Wall mounted system
  •  Wall hung system
  • Free-standing system 

System Options

  • 2-6 tankless units per system
  • Indoor & Outdoor systems
  • Common venting options for up to 10 units
  • Easy manifolding of up to 20 units

 Engineered Solution by Rheem

  •  Scalable from 11,000 BTU/h to 1,199,400 BTU/h per system (6 units max per system rack, multiple racks can be linked up to 20 total units or 3,998,000 BTU/h)
  •  Multiple configurations
  •  Options for future expansion

 Installation Savings

  • Reduce installation costs with single point connections Industry Best Solutions
  • Minimum side to side clearances = 1/2 inch (to combustibles)
  • Minimum flow rate = 0.26 GPM
  • Minimum activation rate = 0.40 GPM
  • UL-1738 & ULC-S636 certification on PPs venting accessories Redundancy

Efficiency

  • Up to 96% Thermal Efficiency with stainless steel condensing heat exchanger
  • Intelligent electronic controls designed to increase energy efficiency and safety

Performance

  • Low flow fixture compatible – Industry minimum flow rate of .26 GPM and minimum activation flow rate of .40 GPM ensures the user will receive hot water even in low demand situations
  • Recirculation Pump Kit-Ready – Quickly pairs with our Recirculation Pump kit to provide instantaneous hot water at the tap2

Easy Installation and Service

  • Ability to vent with room air
  • Indoor, Natural Gas units are common vent compatible up to 10 units
  • Common venting with Polypropelene 
  • Built-in condensate neutralizer
  • 1/2" Gas line compatibility on every model
  • Exclusive! Maintenance Notice Setting Alerts – flashing a warning code to call for service check
  • Self-diagnostic system for easy installation and service
  • Digital display shows temperature setting and maintenance codes
  • Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3" PVC pipe or 5 ft. of 2" PVC pipe)
  • High altitude capability up to 8,400 ft
  • Commercial Project Sizing Available from Rheem Applications Engineers
  • Digital remote control and 10 ft. of thermostat wire included
  • Freeze protection to -30°F

Technology

  • Manifold control models - with factory installed translator links up to 20 units
  • Hot-start programming - helps minimize fluctuation in water temperature, referred to as “cold water sandwich”, during periods of frequent on/off operation
  • Exclusive! Overheat film wrap with industry-best side to side clearance of 1/2 inch

Parts & Accessories

  • EZ Rack Kit
  • Common Venting: Direct Vent & Room Air header kits
  • AllClear®  Water Treatment System
Voce di capitolato
  • Specifications

    • 95 - 96% Thermal Efficiency  
    • Standard Max High Temperature 185 ºF
    • Manifold Control Models link up to 20 units
    • Common Venting Compatible
    • Service valves included
    • 199,900 BTU/h per unit
    • Commercial Project Sizing Available
Specifiche tecniche
  • Rif. UnicoCTS_WM
  • Famiglia di prodottoTankless
  • Gruppo di famigliaCommercial Gas
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2018-09-10
  • Numero di versione1
Relativo a
  • Materiale principaleAcciaio
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectImpianto idraulico - Scaldabagno
  • Codice ETIMEC000392
  • Nome ETIMInstantaneous water heater
  • Codice Uniclass 2015Ss_55_70_38_45
  • Descrizione Uniclass 2015Instantaneous hot water supply systems
  • Codice CSI MasterFormat 201422 34 13
  • Titolo CSI MasterFormat 2014Instantaneous, Tankless, Gas Domestic Water Heaters
  • Numero OmniClass23-31 29 11 13
  • Titolo OmniClassGas Instantaneous Hot Water Heaters

Disponibilità Regionale

Nord America
Canada
Stati Uniti
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit