Pubblica i tuoi prodotti
VK681 - Model V-BB (Back to Back) Specific Application Attic Sprinkler
Archiviato

VK681 - Model V-BB (Back to Back) Specific Application Attic Sprinkler

The Viking Model V-BB (Back to Back) Attic Sprinklers are UL Listed for both wet and dry pipe systems in combustible and non-combustible sloped attic spaces, and can be installed with steel or CPVC piping. (CPVC is allowed on wet pipe systems only.) When used with Viking's Model V-SD (Single Directional) and VK696 Attic Upright sprinklers, it is possible to utilize a single line of piping at the attic peak, eliminating the need for branch lines and greatly reducing the number of required sprinklers and associated materials. The Model V-BB is a glass bulb design with a temperature rating of 200° F, and is offered in either standard brass or ENT plating for areas subject to corrosion. The Viking Model V-BB Attic Sprinkler provides a reduced response time due to its narrow ridge spacing of 6 ft (1,8 m) and long throw pattern (up to 30 ft in each direction measured horizontally), and is offered in three different slope ranges and two different orifice sizes (K=5.6 or 8.0).
Voce di capitolato
  • K-Factor: K8.0 (115)

    Manufacturer: Viking

    Page: F_042915

    Part Number: 19627,19801,19754,19626,19798,19751

    VK Number: VK681

    Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).

    Max Pressure: 175 psi (12 bar)

    Response Type: Fast-Attic

    Occupancy Type: Special

    Thread Size: None

    Min Spacing: Per Standards / Listings

    Max Spacing: Per Standards / Listings

Specifiche tecniche
  • Rif. Unicovk681-fast-attic-back-to-back-sprinkler-k80
  • Famiglia di prodottoViking Fire Sprinklers
  • Gruppo di famigliaViking - Attic Sprinkler / Back to Back
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2021-01-25
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectProdotti antincendio - Impianti sprinkler
  • Codice ETIMEC011371
  • Nome ETIMSpray sprinkler
  • Nome UNSPSCFire sprinkler heads
  • Codice UNSPSC46191610
  • Codice Uniclass 2015Pr_70_55_97_84
  • Descrizione Uniclass 2015Sprinkler heads
  • Codice CSI MasterFormat 201421 13 00
  • Titolo CSI MasterFormat 2014Fire-Suppression Sprinkler Systems
  • Numero OmniClass23-29 33 11
  • Titolo OmniClassWater Based Suppression Equipment
  • Codice CSI UniFormat IID4010
  • Titolo CSI UniFormat IISprinklers
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit