Pubblica i tuoi prodotti

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Series 911, 911S Combination Fill Valve and Backflow Preventers are for use in commercial and residential hydronic heating systems to provide make-up water to the boiler, and prevent backflow when supply pressure falls below system pressure. It consists of a brass Watts Model 9D backflow preventer and a bronze Watts Model 1156F feed water pressure regulator in one pre-assembled unit. Model 911 has union NPT x NPT connections. Model 911S has union solder x NPT connections. The Series 911, 911S has a high capacity fill valve that provides quick system filling and purging. It is designed for use in the boiler feed lines of hydronic heating systems. Maximum Pressure: 100psi (6.9 bar).

Voce di capitolato

Keywords: assembly, backflow, backflow preventer valve, backflow valve, bronze body, bypass, cast iron, check valve, cover, dcda, detector, double, double check, doublecheck, epoxy coated, meter, pex crimping tools, pex tools, pressure valve, pressure zone valve, preventer, reduced pressure valve, repairkit, replacement, rpza, shut-off, steam, steamtrap, trap, valve, vlv, watts regulator, plumbing, drains, drainage, reduce pressure zone assembly

Specifiche tecniche

Rif. UnicoCombination-Fill-Valve-and-Backflow-Preventers-911
Famiglia di prodottoPlumbing & Flow Control Solutions
Gruppo di famigliaHydronic & Steam Heating
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-03-08
Numero di versione2

Links

Link al Prodottohttps://www.watts.com/products/plumbing-flow-control-solutions/hydronic-steam-heating/boiler-feed-water-pressure-regulators/911
Descrizione Tecnicahttps://www.watts.com/dfsmedia/0533dbba17714b1ab581ab07a4cbb521/20277-source

Relativo a

Materiale principaleAcciaio inossidabile
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectImpianto idraulico - Valvole
Codice Uniclass 2015Ac_10_40_63
Descrizione Uniclass 2015Pipe fitting
Codice CSI MasterFormat 201440 05 09
Titolo CSI MasterFormat 2014Wall Pipes, Floor Pipes, and Pipe Sleeves
Numero OmniClass23-27 43 00
Titolo OmniClassPipe Fittings
Codice CSI UniFormat IIC1030
Titolo CSI UniFormat IIFittings

Disponibilità Regionale

Nord America
Canada
Stati Uniti

Prodotti simili

Immagine per Lead Free* Reduced Pressure Zone Assemblies - LF009

Watts Lead Free* Reduced Pressure Zone Assemblies - LF009

4.5 (33)

Immagine per 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Watts 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Immagine per Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

Watts Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

4.2 (12)

Immagine per Potable Water Expansion Tanks - PLT

Watts Potable Water Expansion Tanks - PLT

4.8 (18)

Immagine per Downspout Nozzle - RD-940

Watts Downspout Nozzle - RD-940

4.3 (15)

Immagine per Water Hammer Arrestors - 15M2

Watts Water Hammer Arrestors - 15M2

4.7 (21)

Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

Lavora direttamente con gli oggetti BIM accanto a Revit
2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit