Wilkins 70XL Water Pressure Reducing Valve, 3/4" & 1", Lead Free*

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, of the direct-acting type, and ASSE® 1003 Listed. The integral bypass check valve main body and bell housing shall be cast bronze (ASTM B 584). The pressure reducing valve shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions using an adjusting bolt. All internal parts shall be corrosion resistant and included in a replaceable cartridge. The bronze bell housing shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 70XL.

Compliance:

ASSE® Listed 1003
IAPMO® Listed
CSA® Certified
City of Los Angeles Approved
Meets the requirements of NSF/ANSI/CAN 61 & 372* *(LESS THAN 0.25% WEIGHTED AVERAGE LEAD CONTENT)

Features:

Sizes 3/4", 1"
Maximum working water pressure: 300 psi
Maximum working water temperature: 140°F
Reduced pressure range: 25 psi to 75 psi
Factory preset: 50 psi
Threaded connections (FNPT): ANSI B1.20.1
Copper connections (FC): ANSI B16.22
CPVC tailpiece Max. hot water temp.: 180°F @ 100 psi
Cold water rated temp.: 73.4°F @ 400 psi

Voce di capitolato

Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The unitized replaceable cartridge reduces time involved with cleaning and maintenance. The direct acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.
keywords: Pressure Reducing Valves,Lead-Free Products,Zurn Wilkins Water Control,Healthcare,Irrigation,Development,Civil,Transportation,Correctional/Institutional,Commercial,Food Service,Industrial/Processing Plant,Light Commercial,Residential Multi-Family,Residential/Light Commercial,Residential Single-Family,Sports Complex/Recreational Center,Waterworks,Zurn Wilkins Pressure Reducing Valves,Z-Bite™ Solderless Connections,Z-Press™ Solderless Connections,CA Mandatory Water Reduction,Lead-Free Law Compliance,MasterSpec,Retrofit and Replacement,Water Conservation,Zurn Wilkins,Model 70, 70,0XL,XL,12-70XL,1-70XL,34-70XL

Specifiche tecniche

Rif. Unicozurn-70xl
Famiglia di prodottoPlumbing
Gruppo di famigliaValves
TipoOggetto (oggetto singolo)
Data di pubblicazione2025-09-02
Numero di versione1

Links

Link al Prodottohttps://www.zurn.com/products/water-control/pressure-reducing-valves/70xl
Istruzioni di installazionehttps://files.zurn.com/care-cleaning-install-warranty-sheets/is70xl.pdf
Descrizione Tecnicahttps://files.zurn.com/spec-sheets/reg-70xl.pdf

Relativo a

Materiale principaleBronzo
Materiale secondarioAcciaio inossidabile
Progettato inStati Uniti

Classificazioni

Categoria BIMobjectImpianto idraulico - Valvole
Clasificazione IFCValvola
Codice Uniclass 2015Pr_65_54_94_72
Descrizione Uniclass 2015Reduced pressure zone valves
Codice CSI MasterFormat 201440 05 67
Titolo CSI MasterFormat 2014Specialized Pressure and Flow-Control Valves
Numero OmniClass23-27 31 47
Titolo OmniClassPressure Regulating Valves

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago