Z874-12 Trench Drain System (USA Configurable)

Zurn Z874-12 Trench Drain System. High density polyethylene structural composite drain channel with 1.00 Percent bottom slope. All sections modular 80 inch lengths with interlocking ends and radiused bottom. Complete with heavy-duty Dura-Coated steel frame w/ anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and class C extra heavy-duty ductile iron grate-with 4 stainless steel lockdowns. USA Configurable

Model contains -U4 bottom outlets

Saves labor up to 75%
Rebar clips provided with system for elevation set
4-corner grate lock down for dynamic loading situations
Mechanical interlocking connections

Voce di capitolato

ENGINEERING SPECIFICATION: Zurn Z874-12 Channels shall be 80" long, 17" wide reveal and have a 12" wide throat. Modular channel sections shall be made of 0% water absorbent High Density Polyethylene (HDPE). Shall have a positive mechanical connection between channel sections that will not separate during the installation and shall mechanically lock into the concrete surround every 10". Channels shall weigh less than 6.6 lbs. per linear foot, have smooth 3.5" radiused self cleaning bottom with a Manning's coefficient of .009 and 1.00% or neutral 0% built-in slope. Channels are available with inverts ranging from 9.25" to 34.21". Channel shall have all grates locked down. Channels come with clips attached to the frame to accommodate vertical re-bar for positioning and anchoring purposes. Shall be provided with the standard DGC grate, Zurn 16-1/4" wide Ductile Iron Slotted Grate, which locks down to the frame with 4 individual bolt anchors per grate. Ductile Iron conforms to ASTM specification A536-84, Grade 80-55-06. Ductile Iron grate is rated class C per the DIN EN1433 top load classifications. Supplied in 20" [508 mm] nominal lengths with 13/16" wide slots, and 1-3/4" bearing depth. Grate has an open area of 118 sq. in. per ft. [249779] sq. mm per meter]. The 1/4" thick Carbon Steel Frame Assembly conforms to ASTM specification A36 with 10 - 4" long concrete anchors per 80". The frame is supplied with a powder coated finish. All welds must be performed by a certified welder per ASTM standard AWS D1.1. Frames shall be produced in the USA.

Specifiche tecniche

Rif. UnicoZ874-12
Famiglia di prodottoLinear Trench Drain Systems
Gruppo di famigliaHDPE
TipoOggetto (oggetto singolo)
Data di pubblicazione2022-07-20
Numero di versione1
Larghezza (pollici)17
Profondità (pollici)80

Links

Link al Prodottohttps://www.zurn.com/products/drainage-interceptors/trench-drain-systems/linear-trench-drain/general-purpose-drainage-exterior/z874-12
Istruzioni di installazionehttps://files.zurn.com/care-cleaning-install-warranty-sheets/ft754.pdf
Descrizione Tecnicahttps://files.zurn.com/spec-sheets/z874-12.pdf

Relativo a

Materiale principaleHigh-density polyethylene (HDPE)
Materiale secondarioDuctile Iron
Progettato inStati Uniti

Classificazioni

Categoria BIMobjectImpianto idraulico - Scarico
Clasificazione IFCOggetto
Codice Uniclass 2015Pr_65_52_24_24
Descrizione Uniclass 2015Drainage channels with gratings
Codice CSI MasterFormat 201422 14 26.19
Titolo CSI MasterFormat 2014Facility Trench Drains
Numero OmniClass23-39 29 13 19
Titolo OmniClassSurface Water Drainage Systems
Codice CSI UniFormat IID20
Titolo CSI UniFormat IIPLUMBING

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago