Pubblica i tuoi prodotti
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK

    Model 8611 Corner RiserPACK

    4.6 su 5 stelle4.6(10 recensioni)

    AGF's commercial RiserPACK Model 8611 is a riser manifold for NFPA 13 fire sprinkler systems and is designed to fit into a corner to minimize protruding and comply with ADA Standards. Model 8611 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way universal gauge valve, and a Model 7500 pressure gauge. Available with a steel body in sizes 2"-6", orifice sizes 3/8" (K 2.8) - 25K, and a groove x groove connection. AGF's corner manifold is available with a right or left drain to accommodate every installation configuration.

    Voce di capitolato
    • Model 8611 Commercial Corner RiserPACK

      1. 2.1 SPRINKLER SPECIALTY PIPE FITTINGS - Flow Detection and Test Assemblies:
        1. Product: Commercial Model M8611. Includes a flow switch, TESTanDRAIN Model 1011A, Model 7600 3-way Globe Valve, and a M7500 Pressure Gauge and a model M7000 Pressure Relief Valve.
          1. Riser Model: Pre-Assembled TESTanDRAIN Riser 2, 2-1/2, 3, 4, and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm):
            1. Inlet and Outlet (Schedule 10 steel): Grooved 2, 2-1/2, 3, 4 and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm) Models.
            2. Schedule 10 fabricated steel body with 3mil (.08 mm) powder coated red finish.
            3. Standard: UL's "Product iQ" listing, or "Approval Guide," published by FM Global, listing. NFPA 13.
            4. Pressure Rating: 300 psig (2070 kPa).
            5. Size: Same as connected piping.

      ** NOTE TO SPECIFIER ** Delete valve not required.

      1. Valve Model 1011 TESTanDRAIN valve for a 2 inch (51 mm) Model:
        1. 1 inch (25 mm) FNPT.

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      1. Valve Model 1011 TESTanDRAIN valve for a 4 or 6 inch (102 mm, 152 mm) Models:
        1. 2 inch FNPT.

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      7. Test Orifice Size: Nominal 25.2K, as required by NFPA 13, latest edition.
      8. Water flow alarm switch.
      9. Pressure Gauge: AGF Model 7500.
      10. 1/4 inch, 3-way globe valve: AGF Model 7600
      11. Pressure Relief Valve and Drainage Piping: AGF Model 7000 or AGF Lockable Model 7000L

      ** NOTE TO SPECIFIER ** Delete pressure rating not required.

      1. Pressure Rating: Factory rated at 175 PSI.
      2. Pressure Rating: 200 PSI.
      3. Pressure Rating: 225 PSI.
      4. Pressure Rating: 300 PSI.
      5. Body Material: Bronze body and stainless steel spring.
      6. Components: Nylobraid flexible tube, Two 1/2 inch (13 mm) NPT by barbed 90 degree elbows, external identification plate and integral flushing handle to remove debris.
      7. 1/2 inch (13 mm) MIPT inlet, 1/2 inch (13 mm) FIPT outlet.
      8. Relief pressure shall be factory set to project specifications.
      9. Relief valve shall operate to the OPEN position between 90% and 105% of the set pressure.
      10. Relief valve shall reseat or CLOSE at a minimum of 80% of set pressure.
    Specifiche tecniche
    • Rif. UnicoAGF-Corner-Riser
    • Famiglia di prodottoAGF Fire Sprinkler Products
    • Gruppo di famigliaRiserPACK®
    • Data di pubblicazione2022-03-02
    • Numero di versione1
    Relativo a
    • Materiale principaleAcciaio verniciato a polvere
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    Classificazioni
    • Categoria BIMobjectProdotti antincendio - Impianti sprinkler
    • Codice CSI MasterFormat 201421 00 00
    • Titolo CSI MasterFormat 2014Fire Suppression
    • Numero OmniClass23-29 33 00
    • Titolo OmniClassFire Suppression System Components
    • Codice CSI UniFormat IID40
    • Titolo CSI UniFormat IIFIRE PROTECTION

    Disponibilità Regionale

    Asia Europa Africa Sud America Oceania Nord America
    Afghanistan
    Albania
    Algeria
    Argentina
    Australia
    Bahamas
    Arabia Saudita
    Austria
    Angola
    Bolivia
    Figi
    Belize
    Armenia
    Belgio
    Benin
    Brasile
    Isole Salomone
    Canada
    Azerbaijan
    Bielorussia
    Botswana
    Cile
    Nuova Caledonia
    Costa Rica
    Bangladesh
    Bosnia ed Erzegovina
    Burkina Faso
    Colombia
    Nuova Zelanda
    Cuba
    Bhutan
    Bulgaria
    Burundi
    Ecuador
    Papua Nuova Guinea
    El Salvador
    Cambogia
    Cipro
    Camerun
    Guiana Francese
    Timor Est
    Giamaica
    Cina
    Croazia
    Ciad
    Guyana
    Vanuatu
    Groenlandia
    Corea del Nord
    Danimarca
    Congo
    Isole Falkland (Malvine)
    Guatemala
    Corea del Sud
    Estonia
    Costa d'Avorio
    Paraguay
    Haiti
    Emirati Arabi Uniti
    Finlandia
    Egitto
    Perù
    Honduras
    Filippine
    Francia
    Eritrea
    Suriname
    Messico
    Georgia
    Germania
    eSwatini
    Uruguay
    Nicaragua
    Giappone
    Grecia
    Etiopia
    Venezuela
    Panamá
    Giordania
    Irlanda
    Gabon
    Porto Rico
    India
    Islanda
    Gambia
    Repubblica Dominicana
    Indonesia
    Italia
    Ghana
    Stati Uniti
    Iran
    Lettonia
    Gibuti
    Iraq
    Lituania
    Guinea
    Israele
    Lussemburgo
    Guinea Equatoriale
    Kazakistan
    Macedonia del Nord
    Guinea-Bissau
    Kirghizistan
    Moldavia
    Kenya
    Kuwait
    Montenegro
    Lesotho
    Laos
    Norvegia
    Liberia
    Libano
    Paesi Bassi
    Libia
    Malesia
    Polonia
    Madagascar
    Mongolia
    Portogallo
    Malawi
    Myanmar (Burma)
    Regno Unito
    Mali
    Nepal
    Repubblica Ceca
    Marocco
    Oman
    Romania
    Mauritania
    Pakistan
    Russia
    Mozambico
    Palestina
    Serbia
    Namibia
    Qatar
    Slovacchia
    Niger
    Siria
    Slovenia
    Nigeria
    Sri Lanka
    Spagna
    Repubblica Centrafricana
    Tagikistan
    Svalbard e Jan Mayen
    Repubblica Democratica del Congo
    Tailandia
    Svezia
    Ruanda
    Taiwan
    Svizzera
    Sahara Occidentale
    Turchia
    Ucraina
    Senegal
    Turkmenistan
    Ungheria
    Sierra Leone
    Uzbekistan
    Somalia
    Vietnam
    Sudafrica
    Yemen
    Sudan
    Sudan del Sud
    Tanzania
    Togo
    Tunisia
    Uganda
    Zambia
    Zimbabwe