ASSA ABLOY LH6080L - Portale isotermico - autoportante esterno

• Loading bay without thermal bridges. Full thermal separation between interior and exterior. Suitable for new builds and retrofitting.
• Dock leveller optionally as swingdock with swing lip or teledock with lip extension. Dock shelter optionally mechanical with PVC curtains or inflatable with bags in PVC. Sectional door optionally manual or electric.
• Modular design consisting of 2 wall elements and 1 roof element.
• Roof slope with an angle of 4° from rear to front
• The entire steel frame construction is hot-dipped galvanised.
• Self-supporting construction with proven statics.
• Steel construction designed in accordance with DIN 18800
• Assumed loads in accordance with DIN 1055 Section 4
• Basic wind load: 0,84 kN/m², Eurocode 3
• Basic snow load: 2,00 kN/m², Eurocode 3
• Accumulated snow load: 3,50 kN/m², Eurocode 3

Dimensions (width / length):
• Nominal length: 2000, 2450, 3000 mm
• Nominal width: 3300, 3500, 3600, 3750 mm
• Angular adjustment: 90°

Dimensions (length / height):


Total Height > TH*

NL 2000 NL 2450 NL 3000

DH
950 3880 3910 3950

1000 3830 3860 3900

1050 3780 3810 3850

1100 3730 3760 3800

1150 3680 3710 3750

1200 3630 3660 3700

1250 3580 3610 3650

1300 3530 3560 3600

1350 3480 3510 3550

1400 3430 3460 3500

1450 3380 3410 3450

1500 3330 3360 3400

* Measurement only valid for insulated wall setup. For uninsulated wall setup TH is 60mm less. When the loadhouse is supplied with rain pipe and gutter add 100mm.



Cladding:
 Type HU - Uninsulated cladding with profiled galvanized sheeting, 0,6 mm profiled steel sheet.
 Type HI – Cladding with ISO panel thickness 40mm, steel sheet galvanized
 Type HX - Steel frame construction without cladding
Self-supporting design with reinforcements suitable for onsite cladding

Angular adjustment:
 90° to building (standard)
 45° to building
 135° to building

Standard paints:
 Type HMU with profiled sheeting
RAL 1015 / RAL 3000 / RAL 5010 / RAL 6005 / RAL 6011 / RAL 6020 / RAL 7016 / RAL
7032 RAL 7035 / RAL 8004 / RAL 8011 / RAL 8012 / RAL 9002 / RAL 9006 / RAL 9007 /
RAL 9010
 Type HMI with ISO panel
RAL 1015 / RAL 7035 / RAL 9002 / RAL 9006 / RAL 9007 / RAL 9010

Options:
 Drainpipe and gutter in galvanized finish
 Wall protection interior in veneer plywood up to a height of 1200 mm
 Roof section interior with anti-drip coating, only for HU design with profiled sheeting