Pubblica i tuoi prodotti
Heat & Condensate Exhaust Only Vent Hood, VH1 Series

Heat & Condensate Exhaust Only Vent Hood, VH1 Series

3.7 su 5 stelle3.7(6 recensioni)
VH1 Series

Heat & Condensate Exhaust Hood

The VH1 Series is a Type II, Exhaust Only Hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES
  • Superior Exhaust Flow Rates:
  • Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
  • Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
  • Optional Double Wall Front: Used when switches are needed on the face of the hood. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
  • Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
  • Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
    The VH1 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

    Models VH1 are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.
    Specifiche tecniche
    • Rif. Unicocaptiveaire-040
    • Famiglia di prodottoHVAC
    • Gruppo di famigliaHood and Ventilation Equipment
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2012-09-26
    • Numero di versione1
    Relativo a
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    Classificazioni
    • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Ventilazione meccanica
    • Codice Uniclass 2015Ss_65_40_33_51
    • Descrizione Uniclass 2015Mechanical supply ventilation systems
    • Codice CSI MasterFormat 201423 00 00
    • Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
    • Numero OmniClass23-33 00 00
    • Titolo OmniClassHVAC Specific Products and Equipment
    • Codice CSI UniFormat IID30
    • Titolo CSI UniFormat IIHVAC

    Disponibilità Regionale

    Nord America
    Anguilla
    Antigua e Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Costa Rica
    Cuba
    Curaçao
    Dominica
    El Salvador
    Giamaica
    Grenada
    Groenlandia
    Guadalupa
    Guatemala
    Haiti
    Honduras
    Isole BES
    Isole Cayman
    Isole Turks e Caicos
    Isole Vergini Americane
    Isole Vergini britanniche
    Martinica
    Messico
    Montserrat
    Nicaragua
    Panamá
    Porto Rico
    Repubblica Dominicana
    Saint Kitts e Nevis
    Saint Martin
    Saint Vincent e Grenadine
    Saint-Barthélemy
    Saint-Pierre e Miquelon
    Santa Lucia
    Sint Maarten
    Stati Uniti
    Trinidad e Tobago