DBX1000 Plastic Dryer Vent Box with Trim Ring

Part Numbers:

DBX1000- 6 (for 2×6 Framing)
DBX-5.01 (dryer vent box, Trim Ring and straps)
DBX-4.001 (dryer vent box and straps)
DBX-2.001 (Plastic trim ring )

DBX1000-4 (for 2×4 Framing)
DBX-10.01 (dryer vent box, Trim ring and straps_
DBX-9.001 (dryer vent box and straps)
DBX-2.001 (Plastic trim ring )

Packaging:

• The DBX1000’s are packaged 10 dryer vent boxes per carton.
• The trim rings are packaged in a separate carton, 10 trim rings per carton

Dimensions:

• The DBX1000-6 dryer vent box is 16 ½ tall (w/ flange) and 16 ½ wide (w/ Flange) & 5 ½ deep.
• Without flange the box is 14 ½ tall and 14 ½ wide.
• The DBX1000-4 dryer vent box is also is 16 ½ tall (w/ flange) and 16 ½ wide (w/ Flange) & 3 ½ deep.
• Without flange the box is 14 ½ tall and 14 ½ wide.
• The trim ring fits both the 4’’ and the 6’’ size dryer vent box. The trim ring is 17 1/8 tall x 17 1/8 wide.

Benefits:

• The DBX1000 dryer vent box with snap on trim ring is made of high impact polystyrene. The trim helps eliminate extra drywall, paint and caulking repairs.
• The DBX1000 has three 4’’ pipe knockouts so you get to choose which option is meets your requirement. This dryer vent box also can be rotated in any direction to accommodate your venting needs.
• The DBX1000 also has the Length identification label inside it to meet the 2015 IMC building code requirement. IMC 504.8.5.
• Other companies charge you separately for the label.

Building Code:

Approved for single family construction

INTERNATIONAL RESIDENTIAL CODE
Jurisdiction for detached one and two family dwellings and multiple single-family dwellings (townhouses) not more than 3 stories high with separate means of egress.

SECTION 1502
CLOTHES DRYER EXHAUST
There is no reference to a dryer exhaust duct wall receptacle

SECTION 1502.4.6
“LENGTH IDENTIFICATION”
This section requires the installer to provide a tag or label within 6′ of the dryer exhaust stating how many elbows and length of the dryer exhaust until it exits the residence.

CONSTRUCTION SOLUTIONS PROVIDES THE LABEL INSIDE THE DRYER VENT BOX AT NO COST TO MEET THE BUILDING CODE REQUIREMENT.