Pubblica i tuoi prodotti
model FS_4Poles_Single-stage end suction pump

model FS_4Poles_Single-stage end suction pump

■Usage ①General water supply ②Cold/hot water circulation ③Industrial water ④Irrigation ■Features ①We have developed a series of 4-pole type products in pursuit of small size and light weight. ②Bomb efficiency has been drastically improved by adopting an impeller and casing that utilize our original analysis technology. ③The standard specifications (water volume range, liquid temperature, and maximum operating pressure) are wider than those of conventional models, and high indentation specifications (special specifications) are also available. ④A back-pull-out (B.P.O.) structure that enables disassemble and inspection without removing suction, discharge pipes, heat insulation, and cold insulation. ⑤Since the discharge loss is located above the center of the casing and the casing has legs, the structure is resistant to piping loads. ⑥Sealed type coupling guards and protectors are attached to the exposed parts of the rotating body to enhance safety.
Voce di capitolato
  • ■Standard Specifications

    [Number of contacts]

    4 poles

    [Handling liquid]

    Fresh water 0 to 100°C

    [Suction total head]

    -6m (20 °C) *Selection chart Within discharge volume

    ※The aperture 200X200 is-5m.

    ※The aperture 200X150 is-3.5m.

    ※The bore 250X200 is only for indentation.)

    [Max. working pressure]

    Port size 100X80 or less: 0.98MPa

    Diameter 125X100 or more: 1.37MPa

    [Structure]

    Impeller: closed

    Shaft seal: Mechanical seal

    Bearing : Sealed ball bearings

    Flange :JIS10K (standard)

    [Material]

    •Casing: FC200 (bore size 100X80 or less)

    : FC250 (bore size 125X100 or larger)

    Impeller :FC200 (models not listed below)

    : SUS304 (aperture 40X32, 50X40)

    : SCS13 (aperture 65X50, 80X65)

    : FC150 (aperture 100X80)

    :FCD400(125X100FS4L、150X125FS4L、4 N)

    (200X150FS4L、4 N、250X200)

    Spindle: SUS304 (bore size 80X65 or less)

    : SUS403 (aperture 100X80)

    : SUS420J2 (bore size 125X100 or larger)

    [Motor]

    Phase and number of poles: 3-phase and 4-pole

    Voltage:200V(37kW or less)

    :200/400V:45kW~132kW

    (Please contact us for 160W or higher)

    Model/Protective type : Totally enclosed fan type/IP44 (indoor)

    Efficiency: IE3 (Playmium Efficiency)

    [Installation location]

    Indoors

Specifiche tecniche
  • Rif. Unicomodel-fs_4poles
  • Famiglia di prodottoPump
  • Gruppo di famigliaSingle-stage end suction pump
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2025-09-02
  • Numero di versione1
Relativo a
  • Materiale principaleGhisa
Classificazioni
  • Categoria BIMobjectImpianto idraulico - Pompe

Disponibilità Regionale

Asia
Giappone
Libreria prodotti BIMobject

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit