JM Corbond IV® Closed-Cell Spray Foam

JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

Voce di capitolato

PART 2 - PRODUCTS
CLOSED-CELL SPRAY POLYURETHANE FOAM
1. Closed-Cell Spray Polyurethane Foam: ASTM C 1029, Type II, minimum density of 1.8 lb/cu. ft. and minimum aged R-value at 1-inch thickness of 6.8 deg F x h x sq. ft./Btu at 75 deg F.
1. 1. Surface-Burning Characteristics: Comply with ASTM E 84; testing by a qualified testing agency. Identify products with appropriate markings of applicable testing agency.
1. a. Flame-Spread Index: 25 or less.
2. b. Smoke-Developed Index: 450 or less.
Fire Propagation Characteristics: Passes NFPA 285 testing as part of an approved assembly.
Manufacturers: Subject to compliance with requirements, provide products by one of the following:
1. a. Johns Manville, “Corbond IV”; www.jm.com

Specifiche tecniche

Rif. Unicojm-corbond-iv-closed-cell-spray-foam
Famiglia di prodottoBuilding Insulation
Gruppo di famigliaSpray Foam Insulation
TipoOggetto (oggetto singolo)
Data di pubblicazione2026-07-15
Numero di versione1

Links

COBie Product Data Sheethttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Data%20Sheets/Resi%20and%20Commercial/JM_BI_Corbond_IV_DS.pdf
Link al Prodottohttps://www.jm.com/en/insulation-systems/building-insulation/jm-iv-hfo/
Istruzioni di installazionehttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/JM_BI_SPF_Corbond_IV_Installation%20Guide_BID-391.pdf
Certificazione di Prodottohttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/Corbond%20IV%20GREENGUARD%20Gold%20Certification%20205402-420.pdf
Descrizione Tecnicahttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/ER_0146.pdf

Relativo a

Materiale principalePoliuretano
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectMateriali da costruzione - Isolamento
Codice CSI MasterFormat 201407 21 19
Titolo CSI MasterFormat 2014Foamed-In-Place Insulation
Numero OmniClass23-13 25 19
Titolo OmniClassThermal Insulation

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago