製品の公開
SINTESI Wall Wi-Fi and radiofrequency chronothermostat
Emmeti SPA

SINTESI Wall Wi-Fi and radiofrequency chronothermostat

Google翻訳”,

Wi-Fi接続と無線周波数モジュールを備えた電子クロノサーモスタット、毎週のプログラミングと壁の設置、暖房モード(冬)と空調モード(夏)の両方での室温調整用に設計されています。
AppStoreとGooglePlayで入手できる無料アプリを使用すると、スマートフォンやタブレットからでもプログラミングと完全な制御が可能になります。アラームの状況は、指定されたアドレスにメールを送信することで報告されます。
熱発生器の作動は、リモートアクチュエータ(無線周波数信号を送信することによって制御される)またはケーブル(搭載されているリレーのおかげで)を介して行うことができます。
キーパッドは、ディスプレイの側面にある4つのタッチキーで構成されています。ディスプレイのバックライトの色は、ユーザーがカスタマイズできます。

仕様
  • Electronic chronothermostat with Wi-Fi connection and radio frequency module, weekly programming and wall installation, designed for adjusting the room temperature both in heating mode (winter) and in air conditioning mode (summer).
    The free "Emmeti Sintesi" App, available on the AppStore (for iOS systems) and Google Play (for Android systems) and compatible with Google Home and Amazon Echo, allows programming and complete control even from your smartphone or tablet.
    Any alarm situations are reported by sending an email to the specified address.
    The activation of the heat generator can take place by means of a remote actuator (controlled by sending a radio frequency signal), or via cable (thanks to the relay on board).
    The keypad consists of four touch keys located on the sides of the display.
    The color of the display backlight can be customized by the user.


    Technical data:

    Fixing: to the wall or to cover on a standard 503 box
    Power supply 230Vac (-15% ÷ + 10%) 50 / 60Hz
    Maximum consumption: 6 VA / 230Vac
    Relay capacity at 250 Vac: 5 A
    Operating modes: summer / winter / off
    Type of regulation: ON / OFF, proportional or setpoint sending for autonomous management of the radiofrequency actuator
    Differential: 0.1 ÷ 1 ° C
    Programming: weekly, minimum interval 1 hour
    Settable temperatures: 3 + manual + antifreeze
    Settable setpoint: 2 ÷ 50 ° C
    Measured temperature resolution: 0.1 ° C
    Measurement accuracy: 0.5 ° C
    Antifreeze temperature (excludable): 1 ÷ 50 ° C
    Ignition delay: 15, 30 or 45 minutes
    Accuracy of the clock: ± 1 s / day
    Relative humidity display: range 20 ÷ 90%
    Keypad lock with password to prevent changes by unauthorized persons
    Automatic change of daylight saving time and automatic synchronization of date and time when connected to the network
    Operating temperature: 0 ÷ 50 ° C
    Storage temperature: -10 ÷ 65 ° C
    Operating humidity: 20% ÷ 90% RH non condensing
    Degree of protection: IP40

    Compatible with radiofrequency actuators both for DIN bar and chronothermostatic for thermostatic valves
    Maximum distance between SINTESI WALL WI-FI RF and radiofrequency actuator: 50 meters in free field
    Delegated Regulation (EU) n. 811/2013; annex IV-3:
    - Class of the temperature control device: Class 4; Class IV
    - Contribution of the temperature control device to seasonal space heating energy efficiency in%: 2%
    Display with configurable backlight: always off, color chosen from 48 possible shades or variable between red, green and blue based on the difference between the measured temperature and the set one.

    Dedicated application "" Emmeti Sintesi "", which allows you to remotely control the thermostat using your smartphone or tablet.

    In detail:
    - turn on and off the air conditioning system;
    - create and modify weekly programs;
    - change the values of the operating temperatures;
    - simplify programming thanks to the copy-paste of a program over several days;
    - set holiday days in which the system remains off;
    - configure e-mail address to receive notifications when the measured temperature has exceeded a minimum or maximum value that can be set;
    - block the operation from the keyboard ("local operation block"), allowing the control of the device only from the App itself. 

技術仕様
  • Unique refChronothermostat_SINTESI_Wifi_RF
  • コレクションセットTemperature Controls
  • コレクションSintesi
  • タイプオブジェクト(1つのオブジェクト)
  • 公開日2020-10-27
  • エディション1
  • 高さ(Mm)85
  • 幅(mm)130
  • 奥行き(mm)28
関連
  • 主なマテリアルプラスチック
  • 設計国イタリア
  • 製造国イタリア
識別情報
  • BIMobjectカテゴリHVAC - 制御パネル
  • MasterFormat 2014 コード23 09 00
  • MasterFormat 2014 タイトルInstrumentation and Control for HVAC
  • OmniClassNumber23-27 15 23
  • OmniClassタイトルHVAC Controls

対応地域

ヨーロッパ
アイスランド
アイルランド
アルバニア
アンドラ
イギリス
イタリア
ウクライナ
エストニア
オーストリア
オーランド諸島
オランダ
ガーンジー島
キプロス
ギリシャ
クロアチア共和国
サン・マリノ
ジブラルタル
ジャージー島
スイス
スヴァールバル諸島およびヤンマイエン島
スウェーデン
スペイン
スロバキア
スロベニア
セルビア
チェコ共和国
デンマーク
ドイツ
ノルウェー
ハンガリー
フィンランド
フェロー諸島
フランス
ブルガリア
ベラルーシ
ベルギー
ポーランド
ボスニア・ヘルツェゴビナ
ポルトガル
マルタ
マン島
モナコ
モルドバ
モンテネグロ
ラトビア
リトアニア
リヒテンシュタイン
ルーマニア
ルクセンブルク
ローマ教皇庁 (バチカン)
ロシア
北マケドニア
Common.Footer.ValueProp.Image.AltText

Revit用デザインアプリ

ワンクリックでRevitモデルにファミリを直接ロード

新しいオブジェクトに簡単にアクセスし、Revitファミリを保存し、チームと共同作業できる場所を入手してください。

  • チェックマークRevitの横でBIMオブジェクトを直接操作
  • チェックマーク 2GBのクラウドストレージ - Revitコンテンツを保存
  • チェックマーク Revitから直接エンボディドカーボンLCA(A1-A3)を取得