FRCM reinforcement Kimisteel GLV 650 system

Kimia

FRCM reinforcement Kimisteel GLV 650 system

Google翻訳”,

Kimisteel GLV 650は、組積造構造物の補強、アーチ構造の強化、梁や根太の構造補強、柱や支柱の拘束、軽量鉄筋を用いたプレキャストコンクリート部材の製造、鉄筋粘土レンガの製造などに使用されます。Kimisteel GLV 650は、高強度亜鉛メッキフィラメントからなる一方向性補強布です。この製品は、無機マトリックスと併用することで、組積造、鉄筋コンクリート、プレストレスト鉄筋コンクリートの構造強化を実現できます。

仕様

Structural reinforcement or seismic retrofitting of masonry structures, equipped with CVT for FRCM systems. The process includes the following application phases: cleaning the substrate and, if necessary, reconstruction or smoothing the surface with a suitable mortar. Apply a first layer of Basic MALTA M15/F mortar from Kimia S.p.A. or a similar product. The maximum thickness per coat is 5 mm. The mortar must have the following characteristics: grain size distribution UNI EN 1015-1: 1.2 mm; compressive strength after 28 days UNI EN 1015-12: >15 N/mm²; 28-day flexural tensile strength >4 Mpa and will be CE marked as R2 mortar based on UNI EN 1504-3, as class M15 masonry mortar according to EN 998-2 and as GP CS IV internal and external mortar according to UNI EN 998-1. While the product is still fresh, apply Kimisteel GLV 650 galvanized zinc steel fabric from Kimia S.p.A. or a similar product, applying light pressure with the spatula and/or trowel to embed the fabric in the matrix. The galvanized steel mesh must guarantee the following characteristics: tensile modulus of elasticity: 182.9 GPa; steel weight: 650 g/m2; equivalent thickness: 0.083 mm; maximum load per unit width: 130.97 kN/m. Apply a further coat of the same matrix to the mesh using a metal spatula and/or trowel, for a total reinforcement system thickness of 10 mm. The reinforcement system thus created is in possession of CVT, pursuant to point 11.1, case C, of the NTC 2018, according to the qualification procedures for reinforcement systems in point 3 of the "Guideline for the identification, qualification and acceptance control of inorganic matrix fiber-reinforced composites (FRCM) to be used for the structural consolidation of existing buildings". The supply and installation of all the materials described above and anything else required for the finished work is included, excluding anchors, which are calculated separately. ------ Structural reinforcement or seismic retrofitting of concrete structures, equipped with CVT for FRCM systems. The process includes the following application phases: cleaning the substrate and, if necessary, reconstruction or smoothing the masonry surface with a suitable mortar. Apply a first layer of Betonfix MONOLITE N mortar from Kimia S.p.A. or a similar product. The maximum thickness per coat is 5 mm. The mortar must have the following characteristics: grain size range UNI EN 1015-1: 0.1-0.5 mm; compressive strength after 28 days UNI EN 1015-12: > 50 MPa; flexural strength after 28 days at 21°C > 8 MPa and will be CE marked as R4 mortar based on UNI EN 1504-3. While the product is still fresh, apply Kimisteel GLV 650 galvanized zinc steel fabric from Kimia S.p.A. or a similar product, applying light pressure with the spatula and/or trowel to embed the fabric in the matrix.The galvanized steel mesh must guarantee the following characteristics: tensile modulus of elasticity: 182.9 GPa; steel weight: 650 g/m2; equivalent thickness: 0.083 mm; maximum load per unit width: 130.97 kN/m. Apply a further coat of the same matrix to the mesh using a metal spatula and/or trowel, for a total reinforcement system thickness of 10 mm. The reinforcement system thus created is in possession of CVT, pursuant to point 11.1, case C, of the NTC 2018, according to the qualification procedures for reinforcement systems in point 3 of the "Guideline for the identification, qualification and acceptance control of inorganic matrix fiber-reinforced composites (FRCM) to be used for the structural consolidation of existing buildings". The supply and installation of all the materials described above and anything else required for the finished work is included, excluding anchors, which are calculated separately.

技術仕様

Unique reffrcm-kimisteel-glv-650
タイプオブジェクト（１つのオブジェクト）
公開日2026-04-13
エディション1

リンク

製品のURLhttps://www.kimia.it/en/pultruded-and-reinforcing-fabrics/kimisteel-glv-650

ヨーロッパ
アイスランド
アイルランド
アルバニア
アンドラ
イギリス
イタリア
ウクライナ
エストニア
オーストリア
オーランド諸島
オランダ
ガーンジー島
キプロス
ギリシャ
クロアチア共和国
サン・マリノ
ジブラルタル
ジャージー島
スイス
スヴァールバル諸島およびヤンマイエン島
スウェーデン
スペイン
スロバキア
スロベニア
セルビア
チェコ共和国
デンマーク
ドイツ
ノルウェー
ハンガリー
フィンランド
フェロー諸島
フランス
ブルガリア
ベラルーシ
ベルギー
ポーランド
ボスニア・ヘルツェゴビナ
ポルトガル
マルタ
マン島
モナコ
モルドバ
モンテネグロ
ラトビア
リトアニア
リヒテンシュタイン
ルーマニア
ルクセンブルク
ローマ教皇庁 (バチカン)
ロシア
北マケドニア