製品の公開
Wall ladder system with 850 offset
Wall ladder system with 850 offset
Wall ladder system with 850 offset
Wall ladder system with 850 offset
    Lindab
    アーカイブ

    Wall ladder system with 850 offset

    Wall ladder system with 850 mm. offset for facade installation. The wall ladder comes with different console depth depending on eave measurement. To prohibit unwarranted access to the wall ladder it should end 3 meters above ground or the climbing protection plate shall be connected to the lower part of the ladder. When the facade height is below 5 meter use the sliding protection in combination with a ground ladder. Optional wire system and hand rail features. The wire system option eliminates the need to reconnect the personal fall protection equipment when ascending or descending the wall ladder. The hand rail option provides a safe way to move from the wall ladder to the roof area. Approved as an anchorage point for personal fall protection equipment.
    仕様
    • Ladder width is 450 mm. Maximum distance between consoles are 2000 mm. The facade ladder is CE-labelled and conforms to SS 831340. Made of zink-magnesium coated steel. Powder coated in a wide range of colors. 30 years warranty. Weight: 3,0 kg/m.
    技術仕様
    • Unique refwall-ladder-system-kofsn-850
    • コレクションセットRoof Safety System
    • コレクションWall Ladder System
    • タイプアッセンブリ(複数のオブジェクトで構成)
    • 公開日2017-12-12
    • エディション1
    関連
    • 主なマテリアル亜鉛メッキ鋼
    • 設計国スウェーデン
    • 製造国スウェーデン
    識別情報
    • BIMobjectカテゴリ建設 - 屋根アクセサリー・設備
    • IFC分類オブジェクト
    • UNSPSC名称Ladders
    • UNSPSC30191501
    • Uniclass2015コードPr_25_30_85_02
    • Uniclass2015詳細Access ladders
    • MasterFormat 2014 コード05 51 33
    • MasterFormat 2014 タイトルMetal Ladders
    • OmniClassNumber23-17 23 15
    • OmniClassタイトルLadders
    Common.Footer.ValueProp.Image.AltText

    Revit用デザインアプリ

    ワンクリックでRevitモデルにファミリを直接ロード

    新しいオブジェクトに簡単にアクセスし、Revitファミリを保存し、チームと共同作業できる場所を入手してください。

    • チェックマークRevitの横でBIMオブジェクトを直接操作
    • チェックマーク 2GBのクラウドストレージ - Revitコンテンツを保存
    • チェックマーク Revitから直接エンボディドカーボンLCA(A1-A3)を取得