제품 게시
PowerWave 33
ABB

PowerWave 33

  • PowerWave 33 It's an online double conversion UPS, delivers continuous power availability to network-critical infrastructures of both data centers and process control environments. 
  • Offering maximum power protection, the PowerWave 33 has a small footprint and uses less energy than comparable products – thus delivering significant savings. 
  • The PowerWave 33 is available over a model range of 60kW to 500kW and can be configured to operate as a single, standalone UPS or as a multicabinet UPS system with up to ten UPS cabinets connected in parallel, achieving a total power capacity of up to 5MW.
사양
    • High reliability 
    • Battery type Sealed, lead-acid, maintenance-free or NiCd
    • Online double conversion technology
    • Parallelable systems for increased redundancy 
    • Extendable backup time 
    • Ripple-free and temperature controlled battery chargers extend battery life time performance Low cost of ownership 
    • Up to 96% efficiency in double conversion across a wide load range 
    • Up to ≥99% efficiency in eco-mode 
    • Rated output power factor 1.0 
    • Near-unity input power factor at partial and full loads. Compact size 
    • Small footprint offers saving on expensive floor space 
    • Cooling air exhaust through the top of the cabinet – no rear cabinet clearance is required (only 60–120kW and 400 to 500kW units) Efficient service concept 
    • Front access for serviceability and maintenance 
    • User-friendly LCD 
    • Remote monitoring and connectivity options
    • Storage temperature −25 °C to +70 °C
      Operating temperature 0 °C to +40 °C
      Altitude configuration 1000 m without derating

    Multi Dimentions(w x h x d): 

    615 × 1975 × 480 mm

    850 × 1820 × 750 mm

    1100 × 1920 × 750 mm

    1650 × 1994 × 850 mm

기술 사양
  • 특징 참조powerwave-33
  • 게시일2022-09-02
  • 에디션 넘버1
  • 높이(mm)1975
  • 너비(mm)615
  • 깊이(mm)480
분류
  • BIMobject 카테고리전기 - 분배

지역 가용성

유럽
건지
그리스
네덜란드
노르웨이
덴마크
독일
라트비아
러시아
루마니아
뤽상부르
리투아니아
리히텐슈타인
맨섬
모나코
몬테네그로
몰도바
몰타
바티칸 시국
벨기에
벨로루시
보스니아 헤르체고비나
북마케도니아
불가리아
산마리노
세르비아
스발바르 얀마옌 제도
스웨덴
스위스
스페인
슬로바키아
슬로베니아
아이슬란드
아일랜드
안도라
알바니아
에스토니아
영국
오스트리아
올란드 제도
우크라이나
이탈리아
저지섬
지브롤터
체코 공화국
크로아티아
키프러스
페로 제도
포르투갈
폴란드
프랑스
핀란드
헝가리
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득