제품 게시
ARDEX A 38 Mix - Pre-Blended Ultra Rapid Drying Cement for Internal & External Screeds
ARDEX A 38 Mix - Pre-Blended Ultra Rapid Drying Cement for Internal & External Screeds
    ARDEX

    ARDEX A 38 Mix - Pre-Blended Ultra Rapid Drying Cement for Internal & External Screeds

    ARDEX A 38 MIX is a pre-blended cement and graded sand mix, and produces ultra-rapid drying floor screeds which can be walked on after just 3 hours and floorcoverings installed in as little as 4 hours, regardless of thickness. Use ARDEX A 38 MIX for bonded, unbonded and floating screeds in internal and external locations, including wet areas such as swimming pools.

    • Pre-blended with graded sand for convenience – just add water
    • Walk on after 3 hours
    • Receives ceramic and natural stone tiles directly after only 4 hours
    • Install carpet, wood and vinyl floorcoverings after 48 hours
    • Passes BRE Screed (ISCR) Testing after 6 hours
    • After just one day, achieves the acceptable minimum compressive and tensile bending strengths attained by an ordinary cement screed after 28 days
    • For internal and external use, including wet and submerged areas

    Unit Size Available: 25kg

    Coverage: Approximately 0.5m2 at 25mm thick per 25kg unit

    사양
    • Working time at 20°C - approx. 1 hour Walkability at 20°C - approx. 3 hours COMPRESSIVE STRENGTH USING - After 28 days 40.0 N/mm² TENSILE BENDING STRENGTH - After 28 days 5.5 N/mm² BRE SCREED TEST - Normally after 6 hours
    기술 사양
    • 특징 참조Ardex-a-38-mix
    • 제품군Tile & Stone Installation System
    • 제품분류Screeds/Mudbeds
    • 유형개체 (단일 개체)
    • 게시일2019-08-26
    • 에디션 넘버1
    관련성
    • 주 재료시멘트
    • 설계국가독일
    • 제조국가독일
    분류
    • BIMobject 카테고리바닥재 - Tiles
    • IFC 분류Floor
    • UNSPSC 이름Flooring
    • UNSPSC 코드301617
    • Uniclass 2015 코드EF_30_20
    • Uniclass 2015 설명Floors
    • CSI 마스터 형식 2014 코드09 60 00
    • CSI 마스터 형식 2014 제목Flooring
    • OmniClass 번호23-15 17 13 13
    • OmniClass 제목Tile Flooring
    • CSI 단일 형식 II 코드C3020
    • CSI 단일 형식 II 제목Floor Finishes

    지역 가용성

    북미 유럽 아시아
    과들루프
    덴마크
    싱가포르
    과테말라
    독일
    태국
    그레나다
    아일랜드
    그린란드
    영국
    네덜란드령 카리브 해 지역
    폴란드
    니카라과
    프랑스
    도미니카
    도미니카 공화국
    마르티니크
    멕시코
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    버뮤다
    벨리즈
    생마르탱
    생바르텔레미
    생피에르앤드미클롱
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    엘살바도르
    영국령 버진아일랜드
    온두라스
    자메이카
    캐나다
    케이맨 군도
    코스타리카
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    파나마
    푸에르토리코
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득