제품 게시
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
    ARDEX

    ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar

    Weather resistant tile adhesive with ARDEX Weather Proof Technology

    ARDEX WEATHER PROOF TECHNOLOGY: Ready for any weather! High initial strength even at low temperatures, highest frost-thaw change resistance, long processing time even at high temperatures and after only 2 hours drip-proof. With the innovative ARDEX X 90 OUTDOOR MICROTEC3 flexible adhesive you are well prepared for the unpredictability of the weather. Because when working outdoors, the weather conditions play a crucial role. But these are often unpredictable. That's why working outdoors is always associated with a certain risk. Equipped with the new ARDEX WEATHER PROOF TECHNOLOGY, ARDEX X 90 OUTDOOR offers maximum installation safety even in difficult weather conditions. Furthermore, ARDEX X 90 convinces with excellent processing properties such as fully-saturated embedding without fluid bed behavior and a variable consistency setting. ARDEX X 90 OUTDOOR meets the requirements C2 FTE S1 according to EN 12004/12002 and is very low emission EC 1 PLUS R according to GEV EMICODE.

    Cool weather does not provide the ideal conditions for laying tiles and slabs on balconies and terraces. However, laying under these conditions is often unavoidable. ARDEX X 90 OUTDOOR is a cementitious laying mortar which fulfills the properties of a fast adhesive even at cool temperatures and can be walked on and supplied after approx. 3 hours. Thus, the ARDEX X 90 OUTDOOR offers high composite security even at low temperatures. In addition, ARDEX X 90 is equipped with the new MICROTEC3 technology and exceeds the C2 freeze-thaw change requirements according to EN 12004 many times over. So even frequent temperature changes around the freezing point can not damage the adhesive.

    It often happens that when laying balconies and terraces very warm temperatures prevail. These can be air, but also underground temperatures. Conventional instant adhesives are even faster, and therefore hold a very high risk potential for later damage by a very short processing and insertion time. Thanks to its special formulation, the ARDEX X 90 OUTDOOR retains a high processing time, even at high temperatures. The covering can thus be laid comfortably and safely even at high temperatures.

    No damage from heavy rainfall. Even in the most glorious weather and sunshine, it can happen that during laying on balconies and terraces, thunderstorms and rain showers. Such sudden and unexpected showers can lead to excessive flushing of various constituents in the still fresh adhesive during the setting phase and thus permanently disrupt or weaken the adhesive bond. After only 2 hours, the ARDEX X 90 OUTDOOR is resistant to showers and driving rain, providing a further safety component for damage-free outdoor installation.

    Product Highlights:

    • Fast setting even at low temperatures
    • Highest frost-thaw change resistance
    • Driving rain-proof after two hours 
    • Long processing time even at high temperatures 
    • Walkable after approx. 3 hours
    사양
    • Technical specifications

      bulk weight
      approx. 1.10 kg / l

      fresh weight
      approx. 1.60 kg / l

      Processing time at + 20 ° C
      approx. 60 min

      Working time
      approx. 30 min (measured on fresh mortar)

      Accessibility at + 20 ° C
      after approx. 3 h

      underfloor heating fitness
      Yes

      EMICODE
      EC1
       
      packing
      Bags with 25.00 kg net

      storage
      Can be stored in dry rooms for approx. 12 months in the original sealed container.

      Mixing ratio
      approx.  8.50 l water:  25.00 kg  ARDEX X 90 OUTDOOR

      Correction time
      approx. 15 min - 20 min

      GISCODE
      ZP 1 = cementitious product

      Bond strength
      for stoneware tiles after 28 days
      dry, wet approx. 1.0 - 2.0 N / mm 2
      warm approx. 1.0 - 1.5 N / mm 2
      Frost-thaw change 1.0 - 1.5 N / mm 2

      material requirements
      approx. 1.10 kg / m² of powder with toothing 3 x 3 x 3 mm
      approx. 2.10 kg / m² powder with toothing 6 x 6 x 6 mm
      approx. 2.60 kg / m² powder with toothing 8 x 8 x 8 mm
      approx. 3.20 kg / m² powder with toothing 10 x 10 x 10 mm
      approx. 4.60 kg / m² of powder with MICROTEC toothing 12 x 10 x 15 mm

      Joints on the wall
      After 2 h

    기술 사양
    • 특징 참조ardex-x-90-outdoor
    • 제품군Tile & Stone Installation System
    • 제품분류Microtec Rapid Set Flexible Tile and Stone Mortar
    • 유형개체 (단일 개체)
    • 게시일2019-10-07
    • 에디션 넘버1
    관련성
    • 설계국가미국
    분류
    • BIMobject 카테고리바닥재 - Tiles
    • IFC 분류Floor
    • UNSPSC 이름Stone or tile flooring
    • UNSPSC 코드30161706
    • Uniclass 2015 코드EF_30_20
    • Uniclass 2015 설명Floors
    • CSI 마스터 형식 2014 코드09 90 00
    • CSI 마스터 형식 2014 제목Painting and Coating
    • OmniClass 번호23-15 17 13 13
    • OmniClass 제목Tile Flooring
    • CSI 단일 형식 II 코드B1010
    • CSI 단일 형식 II 제목Floor Construction

    지역 가용성

    북미 유럽 아시아
    과들루프
    덴마크
    싱가포르
    과테말라
    독일
    태국
    그레나다
    러시아
    그린란드
    스웨덴
    네덜란드령 카리브 해 지역
    아일랜드
    니카라과
    오스트리아
    도미니카
    이탈리아
    도미니카 공화국
    체코 공화국
    마르티니크
    폴란드
    멕시코
    프랑스
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    버뮤다
    벨리즈
    생마르탱
    생바르텔레미
    생피에르앤드미클롱
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    엘살바도르
    영국령 버진아일랜드
    온두라스
    자메이카
    캐나다
    케이맨 군도
    코스타리카
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    파나마
    푸에르토리코
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득