한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.
새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.
Revit 바로 옆에서 BIM 개체로 직접 작업 - 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
- Revit에서 바로 내재 탄소 LCA(A1-A3) 획득
HumidiPack Steam Humidifier System
HumidiPack®
The Armstrong HumidiPack is a prefabricated steam humidifier system that is ready for insertion in the duct. The HumidiPack consists of a separator/header and multiple-tube dispersion assembly when supplied for use with an Armstrong steam-generating humidifier. A steam-supply control valve, strainer, steam trap and header drain traps are added when HumidiPack is used on pressurized steam.
HumidiPackPlus®
HumidiPackPlus combines the absorption (non-wetting) distance-shortening performance of HumidiPack with the additional feature of steam-jacketed “active” tubes. The result is a dry, uniform discharge of steam for nearly any application with a steam source from a pressurized central supply.
HumidiPack® CF
HumidiPack CF offers the performance of HumidiPackPlus without the need of jacketing steam on pressurized steam applications. Typically used with a vertical header configuration, HumidiPack CF offers excellent separation of entrained moisture from steam with preheated active tubes. The entire face area is cold during periods of no demand, adding no energy to the air stream.
Simplified installation
The HumidiPack Family dispersion assemblies slide neatly into ductwork or air-handling units. This frequently reduces the time and labor required for field installations. Units with horizontal tubes and vertical headers offer all piping on one side of the ductwork or air handler to simplify piping.
Corrosion-resistant stainless steel
The header/separator and dispersion assembly of the HumidiPack Family are of rugged stainless steel, providing a long, trouble-free service life. To minimize maintenance, tube-to-header joints are welded stainless steel rather than assembled plastic adapters with o-rings.
Compatibility with many steam sources
HumidiPack may be used with Armstrong Series CS-10 Steam-to-Steam humidifiers and gas and electric steam-generating humidifiers. HumidiPack is also compatible with systems that have packaged boilers or a central steam supply to 60 psig (4 bar). The HumidiPackPlus and HumidiPack CF may be used with packaged boilers or central steam supply to 60 psig (4 bar).
Application flexibility
Many sizes and configurations of the HumidiPack Family are available to meet new installation or retrofit needs.
Reduced heat gain to duct air
Since no steam is admitted to the manifold assembly unless there is a demand for steam output, there is no heat gain to duct air when HumidiPack and HumidiPack CF are not in use.
The Armstrong HumidiPack is a prefabricated steam humidifier system that is ready for insertion in the duct. The HumidiPack consists of a separator/header and multiple-tube dispersion assembly when supplied for use with an Armstrong steam-generating humidifier. A steam-supply control valve, strainer, steam trap and header drain traps are added when HumidiPack is used on pressurized steam.
HumidiPackPlus®
HumidiPackPlus combines the absorption (non-wetting) distance-shortening performance of HumidiPack with the additional feature of steam-jacketed “active” tubes. The result is a dry, uniform discharge of steam for nearly any application with a steam source from a pressurized central supply.
HumidiPack® CF
HumidiPack CF offers the performance of HumidiPackPlus without the need of jacketing steam on pressurized steam applications. Typically used with a vertical header configuration, HumidiPack CF offers excellent separation of entrained moisture from steam with preheated active tubes. The entire face area is cold during periods of no demand, adding no energy to the air stream.
Simplified installation
The HumidiPack Family dispersion assemblies slide neatly into ductwork or air-handling units. This frequently reduces the time and labor required for field installations. Units with horizontal tubes and vertical headers offer all piping on one side of the ductwork or air handler to simplify piping.
Corrosion-resistant stainless steel
The header/separator and dispersion assembly of the HumidiPack Family are of rugged stainless steel, providing a long, trouble-free service life. To minimize maintenance, tube-to-header joints are welded stainless steel rather than assembled plastic adapters with o-rings.
Compatibility with many steam sources
HumidiPack may be used with Armstrong Series CS-10 Steam-to-Steam humidifiers and gas and electric steam-generating humidifiers. HumidiPack is also compatible with systems that have packaged boilers or a central steam supply to 60 psig (4 bar). The HumidiPackPlus and HumidiPack CF may be used with packaged boilers or central steam supply to 60 psig (4 bar).
Application flexibility
Many sizes and configurations of the HumidiPack Family are available to meet new installation or retrofit needs.
Reduced heat gain to duct air
Since no steam is admitted to the manifold assembly unless there is a demand for steam output, there is no heat gain to duct air when HumidiPack and HumidiPack CF are not in use.
지역 가용성
| 북미 |
|---|
미국 |
비슷한 제품
4.7 (6)
Revit용 Design App
한국의
