보관됨

ASSA ABLOY DL6030C combidock

The electro-hydraulic ASSA ABLOY 6030C Combidock from ASSA ABLOY Entrance Systems eliminates the need for different ramp heights and thereby reduces building costs. It is advisable to equip every frequent loading area with at least one ASSA ABLOY 6030C Combidock so that vehicles of all sizes can he efficiently handled. The telescopic lip is supplied in high-stability aluminium alloy which extremely flat, resulting in smoother passages between leveller and truck bed – giving ergonomic as well as economical advantages due to reduced chock oads for people and less wear and tear on the handling equipment. Crawford

사양

Combidock extending bridge: • Integrated frame with wall anchors (T-frames) • Electro-hydraulic operation with two lifting cylinders • Lip extension in aluminium, in three sections, each with an extender cylinder • Control unit with selector for "Big Truck" and "City van" operation • "Big Truck" operation: The lip to be extended completely in one piece, total width 2000mm • "City van" operation: Only the central lip section is extended, width of central section 1000mm • Automatic, free floating position • Hydraulic emergency stop in any operating position • Automatic mechanical locking in neutral position • Lateral torsion flexibility • Side plates (toe guards) with warning signs both above and below dock level • Internal wiring, plug connection • Power supply by others • Control Unit Protection Class IP55 • Full compliance with with rules and regulations of the European Standard EN 1398 Dimensions: Dimensions Vertical Working range NL LH A B - inside LH* B - down to LP 3000 800 450 375 550 3500 900 560 360 650 4000 930 590 390 650 * When tail lift is in use Nominal width (NW) 2000mm. Load capacity: • "Big Truck" operation 60kN • "City van" operation 20kN Surface: • Surface painted in standard colour RAL 5010, thickness 80µm Hydraulics: • Standard oil for temperature range -20°C - +60°C Control unit: • Voltage 400V 3-phase, 230V 3-phase , cable harness length 18m • Impulse auto button to put the leveller back in parking position Options: Surface  Surface painted in,RAL 3002, RAL 6005 or RAL 9005 thickness 80µm  Surface painted with coat thickness 160µm  Surface hot-dipped galvanised 80µm Frame  W-Frame (welded to pre-cast frame) Hydraulics  Low temperature oil for temperature range -30°C - +60°C  Bio-oil (environmental protection) Energy & Ergonomics  EPDM gap sealing  Slip protection and noise reduction coating Multifunctional docking control for direct control of dock leveller, dock shelter and door with just one control unit  Operating dock leveller and door

기술 사양