InsulBase Polyiso Insulation

InsulBase is a rigid-roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to glass-reinforced felt (GRF). ReadyFlash® Technology is a standard feature of InsulBase Polyiso that allows the contractor to manipulate flash-off times by choosing which side of the insulation board to apply membrane adhesives. ReadyFlash features a dark glass-reinforced felt (GRF) on one side of the insulation board and a light glass-reinforced felt on the other.

Increases surface temperature of the dark facer up to 25ºF above ambient temperature and provides up to 30% faster adhesive flash-off.
Decreases surface temperature of the light facer up to 5ºF below ambient temperature.

Features and Benefits

InsulBase polyiso insulation provides the highest R-value per inch of commercially available insulation products
Zero ozone-depleting components, HFC- and HCFC-free formulation
Approved for direct application to steel decks

사양

Panel Characteristics
- Available in 4' x 4' (1220 mm x 1220 mm) and 4' x 8' (1220 mm x 2440 mm) panels in thickness of ½" (13 mm) to 4.5" (115 mm)
- Available in 4' x 12' (1220 mm x 3660 mm) panels in the following thickness: 1.5", 1.75", 2.0", 2.2", 2.5", 2.6", 3.0", 3.3", and 3.5"Applications
- Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
Codes and Compliances
- ASTM C1289, Type II, Class 1, Grade 2 (20 psi), Grade 3 (25 psi)
- International Building Code (IBC) Section 2603»UL Standard 790, 263 and 1256: Component of Class A Roof Systems (refer to UL Roof Materials’ system directory)
- FM Standards 4450/4470: Class 1 approval for steel roof-deck constructions (refer to FM RoofNavSM)»California Code of Regulations, Title 24, Insulation Quality Standard License #TI-1418
- Third-party certification with the PIMA Quality Mark for Long-Term Thermal Resistance (LTTR) values
- CAN/ULC S704, Type 2, Class 3 (20PSI), Type 3, Class 3 (25PSI)
- Florida Building Code Approval»CDPH compliant for maximum allowable concentrations of target VOCs
Carlisle SynTec Systems’ focus has always been innovation – Innovation to solve problems, improve performance, reduce labor, and above all, improve sustainability. Carlisle is committed to driving sustainable and efficient processes in the design and manufacturing of our products.
- Zero ozone-depleting components, HFC- and HCFC-free formulation»CDPH Compliant for maximum allowable concentrations of target VOCs
- Up to 56.9% recycled content by weight (36.6% post-consumer/20.3% pre-consumer)
- Contributes to LEED® and Green Globes certification requirements
- End-of-life jobsite disposal options available for re-use/re-purposing
- Carlisle Polyiso Roof Insulation and HD Cover Board EPDs available
- PIMA Quality MarkCM Certification Program participant for Long-Term Thermal R-values (LTTR)»Highest R-value per inch providing maximum energy savings and CO2emissions avoidance
Polyiso Eco Ready (Optional)
- 5% bio-content option available (for 2.0" and 2.6" thicknesses)
- Contributes to carbon reduction initiatives via mass balance approach under ISCC PLUS compliance

기술 사양

특징 참조insulbase-polyiso-insulation
제품군Roofing-Products
제품분류Insulation
유형개체 (단일 개체)
게시일2026-08-27
에디션 넘버1

링크

관련성

주 재료폴리카보네이트 PIR

분류

BIMobject 카테고리건축 자재 - 단열
IFC 분류지붕
ETIM 코드EC000406
ETIM 이름Thermal insulation
Uniclass 2015 코드Pr_25_31_28_65
Uniclass 2015 설명Polyisocyanurate (PIR) foam insulation
CSI 마스터 형식 2014 코드07 21 13.13
CSI 마스터 형식 2014 제목Foam Board Insulation
OmniClass 번호23-13 25 19 11
OmniClass 제목Slab and Board Thermal Insulation

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코