제품 게시
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
    DELABIE
    보관됨

    2641S Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Mechanical sequential mixer: opens and closes on cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm classic ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed of the water reduces the development of biofilm. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset standard wall connectors M1/2" M3/4". Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for Healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    기술 사양
    • 특징 참조2641S
    • 제품군Sanitary
    • 제품분류Basin mixer
    • 유형개체 (단일 개체)
    • 게시일2021-05-31
    • 에디션 넘버1
    • 높이(mm)175
    • 너비(mm)215
    • 깊이(mm)278
    관련성
    • 주 재료놋쇠
    • 설계국가프랑스
    • 제조국가프랑스
    • 순 중량(Kg)1781
    분류
    • BIMobject 카테고리위생 - 수도꼭지
    • IFC 분류위생 터미널
    • ETIM 코드EC011328
    • ETIM 이름Washbasin mixing tap
    • Uniclass 2015 코드Pr_40_20
    • Uniclass 2015 설명Sanitary fittings and accessories
    • OmniClass 번호23-31 11 00
    • OmniClass 제목Faucets
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득