Eco Hot Water EQ 3018 ES

Eco Hot Water EQ3018 ES air-water heat pump for domestic hot water with solar integration. Eco Hot Water is the new thermodynamic water heater proposed by Emmeti, designed to exploit only the heat of the air and to reuse it as a renewable source in order to heat the domestic water. It is a heat pump that uses a zero-impact energy source, thus succeeding in combining a double advantage: a considerable reduction of carbon dioxide emissions in the environment, as well as a lower expenditure for the consumption of electricity, with an economic saving that can reach up to 70% compared to the traditional electric water heater. The application of Eco Hot Water guarantees the availability of a significant amount of hot water for sanitary use, as well as the possibility of cooling and dehumidifying small rooms in hot periods.

사양

Floor Heat Pump for the production of domestic hot water.
Aisi 316L stainless steel kettle with electric integration resistance and with coil for the connection of solar thermal collectors. Insulation in rigid expanded polyurethane free of CFC and HCFC with average thickness 50 mm. Supplied as standard with two anti-corrosion electronic anodes. Capacity 300 liters.
Compliant with D.M. 06.04.2004 n. 174 for use with water intended for human consumption.
Complete with recirculation ring connection and "pressure-temperature" safety device supplied.
Complies with the European Directive 2014/68/EU "Pressure Equipment", in application of art. 4 paragraph 3 of the same Directive.
Rotary type compressor positioned on rubber anti-vibration mounts to reduce the transmission of vibrations to the whole system. Refrigerant used R134a. Aluminum condenser exchanger external to the tank. Radial fan. Silver gray casing and ABS front panels. Air inlet and outlet fittings diameter 150 for the optional connection of a ducted system for the extraction of air in the 160-diameter rooms with a total length up to 10 m.
Backlit "touch screen" control panel to facilitate the settings of the various operating parameters: switching the unit on and off, setting the timer for the operation of the unit within 24 hours, adjusting the water temperature, activating the electric heater and management of the circulator relative to the solar collector circuit through the appropriate probe.
Technical data:
- R134a refrigerant fluid (GWP = 1430): 1250 g
- Maximum working pressure: 7 bar
- Operating limits on the water / air side: 9 ÷ 60 ° C / -5 ÷ 43 ° C
- Power supply: 230 Vac - 50 Hz
- Rated electrical input power from the compressor: 460 W
- N ° and power electric heaters: 1 x 1,500 W
- Maximum absorbed power: 2.050 W
- Maximum absorbed current: 8.92 A
- IPX1B degree of protection
- Nominal air flow 400 m³ / h
- Useful static pressure 40 Pa
- Connection connections (left side) 3/4 "
- Dimensions LxHxP 600x1810x670 mm
- Air duct dimensions: D160
- Empty weight 122 kg. Weight with water 422 kg

기술 사양

특징 참조Heat_Pump_Eco_Hot_Water_EQ_3018_ES
제품군Heat Pump
제품분류Eco Hot Water EQ 3018 ES
유형개체 (단일 개체)
게시일2018-02-27
에디션 넘버1
높이(mm)1810
너비(mm)600
깊이(mm)670

링크

제품 URLhttps://efrdoc.com/PP_EcoHotWaterEQ3018EN
설치 안내https://efrdoc.com/M_EcoHotWater
제품 인증https://efrdoc.com/DC_EcoHotWaterEQ3018

유럽
건지
그리스
네덜란드
노르웨이
덴마크
독일
라트비아
러시아
루마니아
뤽상부르
리투아니아
리히텐슈타인
맨섬
모나코
몬테네그로
몰도바
몰타
바티칸 시국
벨기에
벨로루시
보스니아 헤르체고비나
북마케도니아
불가리아
산마리노
세르비아
스발바르 얀마옌 제도
스웨덴
스위스
스페인
슬로바키아
슬로베니아
아이슬란드
아일랜드
안도라
알바니아
에스토니아
영국
오스트리아
올란드 제도
우크라이나
이탈리아
저지섬
지브롤터
체코 공화국
크로아티아
키프러스
페로 제도
포르투갈
폴란드
프랑스
핀란드
헝가리