제품 게시
Itaca KR
Itaca KR
    Fondital

    Itaca KR

    ITACA KR
    The Itaca KR is a wall-hung condensing boiler for heating only, electronically arranged for connection to an external water heater. The boiler uses condensing technology, which allows it to lower consumptions, boost performance, and reduce emissions of pollutants.

    PLUS
    - Modulation ratio 1:9
    - Touch screen user interface
    - Controls to manage 2 different types of solar thermal systems fitted as standard
    - Room temperature can be set from the boiler if an external probe is installed
    - 26-plate DHW heat exchanger

    사양
    • FEATURES
      - Thermopolymer-covered stainless steel heat exchanger
      - Fully pre-mixed burner
      - Modulating gas valve with constant air-to-gas ratio
      - Variable-speed combustion fan
      - Modulating pump with air-purging device
      - 10-litre heating expansion vessel
      - Ready for connection to a GSM modem for remote switching on and off and malfunction alarm (optional equipment)
      - Multifunctional relay for connection to systems with zone valves or to solar systems or to remote boiler shutdown alarms
      - Installation flexibility thanks to IPX5D electrical protection degree
      - Efficiency rating according to 92/42/EEC: ★★★★
      - NOx emission class (EN 297):5
      - Boiler hydraulic replacement kit available as optional equipment
      - Wide modulation range 1:9
      - Electronic ignition, flame detection via ionization
      - By-pass

      PREPARED FOR CONNECTION TO
      - External probe
      - Open Therm Remote Control
      - Zone management board for high and low temperature heating
      - 2 ambient probes
      - GSM modem for remote switching on and off and malfunction alarm (optional equipment)
      - External water heater for domestic hot water production
      - Solar board
       

      FEATURES
      - CH water flow rate electronic control
      - Thermopolymer-covered stainless steel heat exchanger
      - Fully pre-mixed burner
      - 10-litre heating expansion vessel
      - Thermoregulation with external probe (optional)
      - Modulating pump with air-purging device
      - DHW “Comfort” function: ★★★
      - Automatic by-pass
      - Double circuit filling system: automatic or manual

    기술 사양
    • 특징 참조itaca_kr
    • 제품군Boilers
    • 제품분류Wall-hung and floor-standing boilers
    • 유형개체 (단일 개체)
    • 게시일2019-09-17
    • 에디션 넘버1
    • 높이(mm)750
    • 너비(mm)420
    • 깊이(mm)315
    관련성
    • 주 재료알루미늄
    • 설계국가이탈리아
    • 제조국가이탈리아
    분류
    • BIMobject 카테고리HVAC - 보일러
    • IFC 분류보일러
    • ETIM 코드EC000392
    • ETIM 이름Instantaneous water heater
    • UNSPSC 이름Boilers
    • UNSPSC 코드401020
    • Uniclass 2015 코드Pr_60_60_08
    • Uniclass 2015 설명Boilers
    • CSI 마스터 형식 2014 코드23 52 16
    • CSI 마스터 형식 2014 제목Condensing Boilers
    • OmniClass 번호23-33 11 13
    • OmniClass 제목Condensing Boilers
    • CSI 단일 형식 II 코드D3020
    • CSI 단일 형식 II 제목Heat Generating Systems

    지역 가용성

    유럽 아시아
    그리스
    카자흐스탄
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    몰도바
    몰타
    벨기에
    벨로루시
    불가리아
    스웨덴
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    에스토니아
    영국
    오스트리아
    우크라이나
    이탈리아
    체코 공화국
    크로아티아
    키프러스
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득