제품 게시
Flow40 heat recovery ventilator
Flow40 heat recovery ventilator
Flow40 heat recovery ventilator
Flow40 heat recovery ventilator
Flow40 heat recovery ventilator
    Helty

    Flow40 heat recovery ventilator

    Helty Flow40 expands its configuration possibilities to adapt to any level of customisation and provide a suitable response to every requirement. The decentralised wall-recessed system is ideal for both new buildings and renovation projects, thanks to its invisible and modular approach: Flow40 does not require ducting or false ceilings, leaving only the front cover visible, now available in new sheet metal versions or in white or black PMMA. These options are complemented by a paintable flush-to-wall cover for applications where a completely invisible solution is required. The unit is housed in an EPS installation kit, adaptable to different wall thicknesses, manageable during the construction phase and completable at a later stage with the HRV unit and cover. Helty introduces a new heat exchanger technology, allowing the choice between enthalpy or sensible heat exchangers. Flow40 is available in standard versions with dampers, or with dampers and pre-heating. It is also possible to select the position of the control panel: wall-mounted, on a 503 box, or integrated on the unit. As standard, Flow40 is equipped with a humidity sensor that automatically regulates ventilation based on humidity levels, and with a dual filter ePM2.5 65% + Coarse 90% / Coarse 70%, ensuring effective air purification. The Flow40 version with window-side outlets integrates the air grilles directly into the window reveal, making the system even more discreet. The unit can be combined with optional CO₂ and IAQ sensors. With the Helty Home app, ventilation can also be managed remotely, scenarios can be programmed, multiple units can be controlled and daily operation simplified.
    기술 사양
    • 특징 참조Flow40
    • 유형개체 (단일 개체)
    • 게시일2026-03-09
    • 에디션 넘버1
    관련성
    • 설계국가이탈리아
    • 제조국가이탈리아
    분류
    • BIMobject 카테고리HVAC - 열 회수

    지역 가용성

    유럽
    건지
    그리스
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    맨섬
    모나코
    몬테네그로
    몰도바
    몰타
    바티칸 시국
    벨기에
    벨로루시
    보스니아 헤르체고비나
    북마케도니아
    불가리아
    산마리노
    세르비아
    스발바르 얀마옌 제도
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    안도라
    알바니아
    에스토니아
    영국
    오스트리아
    올란드 제도
    우크라이나
    이탈리아
    저지섬
    지브롤터
    체코 공화국
    크로아티아
    키프러스
    페로 제도
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득