제품 게시
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
    Helty

    Flow600 heat recovery ventilator

    Ideal for installations in hospitality facilities, offices, schools and kindergartens, Flow600 Steel allows flexible modulation of the air renewal rate with air flow rates ranging from 250 m³/h (minimum speed) up to 600 m³/h (maximum speed in hyperventilation), with four intermediate air flow settings. This ensures maximum design flexibility for applications requiring high air change rates in medium- to high-occupancy environments. The unit is equipped with an enthalpy cross-flow heat exchanger, ensuring heat recovery efficiency of up to 82% and requiring no condensate drain. Excellent filtration performance is guaranteed by the Coarse 80% + ePM1 80% filter set, supplied as standard. Flow600 is natively integrated into a white-painted steel cover, complete with air supply and exhaust openings, allowing exposed installation without the need for additional aesthetic cladding. The unit can be installed ceiling-mounted or in a vertical wall-mounted configuration, using a dedicated duct-cover casing that allows management of air supply and exhaust connections on either the right or left side, to meet specific design requirements. Installation requires only two 200 mm core drillings on the perimeter wall, or alternatively four 100 mm openings. Thanks to the CO₂ and VOC sensors, Flow600 is able to monitor key parameters for occupant well-being, such as relative humidity, carbon dioxide levels and volatile organic compounds. By detecting values in real time, the HRV unit automatically adjusts the air renewal rate according to the actual needs of the ventilated environment.
    기술 사양
    • 특징 참조Flow600
    • 유형개체 (단일 개체)
    • 게시일2026-02-09
    • 에디션 넘버1
    관련성
    • 설계국가이탈리아
    • 제조국가이탈리아
    분류
    • BIMobject 카테고리HVAC - 열 회수

    지역 가용성

    유럽
    건지
    그리스
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    맨섬
    모나코
    몬테네그로
    몰도바
    몰타
    바티칸 시국
    벨기에
    벨로루시
    보스니아 헤르체고비나
    북마케도니아
    불가리아
    산마리노
    세르비아
    스발바르 얀마옌 제도
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    안도라
    알바니아
    에스토니아
    영국
    오스트리아
    올란드 제도
    우크라이나
    이탈리아
    저지섬
    지브롤터
    체코 공화국
    크로아티아
    키프러스
    페로 제도
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득