제품 게시
Hybrid kitchen fitting F5LME001
Hybrid kitchen fitting F5LME001

    Hybrid kitchen fitting F5LME001

    F5LME hybrid kitchen fitting DN 15 as pillar mixer with swivelling spout, can be locked in the centre position. Adjustable swivel ranges of 50°, 120° and 360°. For connection to hot water and cold water via hoses with strainers. Single lever mixer with mixer cartridge with ceramic disc technology and adjustable, turn-proof temperature stop. Alternative activation using hand reflection via an opto-electronic sensor for time-controlled water release with preset mixing water temperature. Mixer cartridge, solenoid valve and sensor with control electronics in all-metal housing, brushed stainless steel. Laminar jet controller with integrated flow rate controller (8.0 l/min). Projection 220 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control. Optionally for battery operation with battery compartment including 6 V lithium battery (CR-P2) per fitting for installation under the kitchen sink or for separate power supply via 6.75 V/12 V DC power supply unit or AQUA 3000 open system accessories. Battery compartment including battery or power supply unit with extension cable must be ordered separately.
    사양
    • Depressurised no
      With filter yes
      Functional principle manual
      Hygiene flushing prepared
      Diameter nominal DN 15
      Locking mechanism Top section, non-ceramic
      Material fitting stainless steel
      Minimum flow pressure 1 bar
      Type of mixing yes
      Pop-up waste set no
      With rosettes/cover plate no
      Spout rotating, top
      Spout projection 220 mm
      Surface finish fitting brushed
      Temperature limit yes
      Thermal disinfection yes
      Type of mounting tap hole
      Type of operation manual operation
      Type of tap pillar tap
      Volume flow rate at 3 bar 0.13 l/s
      Water connection hose (gland nut)
      Accent colour none
      Power supply connection 6,75 / 12 V DC / A3000 open
      Power consumption 1.5 Voltampere
      Protective system IP 59K
    기술 사양
    • 특징 참조2030061048
    • 제품군Taps
    • 제품분류Manual taps
    • 유형개체 (단일 개체)
    • 게시일2024-09-10
    • 에디션 넘버1
    • 높이(mm)392
    관련성
    • 주 재료스테인레스강
    • 설계국가독일
    • 제조국가독일
    • 순 중량(Kg)3.35
    분류
    • BIMobject 카테고리주방 - 수도꼭지
    • Uniclass 2015 코드Pr_40_20_87_84
    • Uniclass 2015 설명Sink taps

    지역 가용성

    아시아 유럽 오세아니아 북미 아프리카
    아랍에미레이트
    네덜란드
    오스트레일리아
    미국
    남아프리카
    독일
    캐나다
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    벨기에
    세르비아
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아일랜드
    에스토니아
    영국
    오스트리아
    우크라이나
    이탈리아
    체코 공화국
    크로아티아
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득