제품 게시
QMark RCC Cove Heaters

QMark RCC Cove Heaters

RCC - Typical uses are day care centers, apartments, bathrooms, bedrooms, living rooms, kitchens, and foyers.

FEATURES:
  • Type RCC Series Cove Heaters can fulfill the requirements of virtually any type residential or commercial heating situation. Individual room control, ease of installation and out of the way mounting make it equally desirable for total or supplemental comfort heating. Typical uses are day care centers, apartments, bathrooms, bedrooms, living rooms, kitchens, and foyers.
  • DUAL FUNCTION HEATING: In addition to radiant heat, the RCC Series uses part of its energy to heat air passing behind and over the heater by convection flow, thus helping to “mix” the air in the room and achieving balanced heating throughout.
  • INDIVIDUAL ROOM CONTROL - The finite control available with electric heat permits individual room or zone control for greater economy, why heat the entire house when you are using only one or two rooms? This applies equally well for whole house heating or supplemental heating.
  • NEW EXTRUSION DESIGN: The extruded aluminum front panel is coated with high temperature textured paint radiating a majority of its heat energy from the front surface. The remaining energy is “wiped off” by a convection flow behind and over the top of the heater which circulates warm air into the room.
  • CONVENIENT WALL MOUNTING - NEAR CEILING - The RCC cover heater mounts on any wall surface, near the ceiling where its dual function heating can be fully utilized. Radiant heat energy is directed downward, warming people and objects near the floor, as well as the floor itself. Room air gains heat from these objects and rises toward the ceiling. The back side of the cove heater acts as a convector heater, pulling the cooler air from the floor area, behind and over the heater, thus helping to circulate and mix the air in the room until it reaches an equilibrium temperature. The out-of-the-way mounting also permits complete freedom of furniture placement in a room, because the heaters will not be subjected to blockage, which reduces the efficiency of floor or low-wall mounted heaters.
기술 사양
  • 특징 참조marley-027
  • 제품군Unit Heaters
  • 제품분류QMark
  • 유형개체 (단일 개체)
  • 게시일2014-03-10
  • 에디션 넘버1
분류
  • BIMobject 카테고리HVAC - 히터

지역 가용성

북미
미국
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득