QF SD Automatic Diverter Valve

Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

Our Standard-Duty (SD) diverter is a light air diverter that doesn’t sacrifice power. It exhausts air only from industrial machinery while it is operating, which increases suction at all other points in the system and reduces the amount of heated or cooled air exhausted from the work area, saving on ventilation costs.

Built for years of continuous use in the most demanding conditions, our SD Auto Diverter carries a one-year warranty. Standard unit is heavy duty construction of 14ga galvanized steel or 304SS with bolted seams (optional 316SS or carbon steel). Heavy duty flange bearings and rubber seal in 14ga steel door. Rubber seal is 1/4” thick polymer compound #AB-3205. Auto Diverter Valves have single magnetic cylinders with galvanized or SS body and steel rod. Solenoid has plastic housing.

Minimum 75psi.
45º angle only.
Available with flanged ends in diameters up to 13", and other various end types

Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / end type options.

사양

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.