제품 게시
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door
    SAFIR

    SAFIR S424 Automatic Non-Protruding Up-and-Over Communal Garage Door

    별점 4.3/54.3(6 리뷰)
    Custom-made automatic non-protruding up-and-over door for communal garages. 24 V brushless drive with brake, light curtain integrated into the posts and a fully customisable panel.
    사양
    • Automatic up-and-over door for communal garages and car parks in intensive use. Drive: 24 V brushless motor with brake, slowdown at the end of opening and closing, panel held in the raised position. Safety: light curtain integrated into the posts, detection over 1,800 mm in height. Strap counterweight with patented rocker system. Control: multifunction electronic board, three-indicator board for visual identification of operation and faults. Signalling: three low-consumption flashing lights and two LED zone lights integrated into the posts. Maximum dimensions: 5,700 x 2,900 mm. Maximum area: 12 sq m. Duty cycle: up to 1,000 cycles per 24 hours. Panel infills: smooth sheet, smooth sheet with recessed joints, perforated sheet, 40 mm insulated panels, SAFIR louvres, 20 x 20 mesh, bars, timber, laser cutting, Baro panel, Aéro panel with low, high, full or mixed ventilation. RAL colour chart finishes. Options: timed restart, anti-noise kit, vehicle detector, panel lock kit, remote electromagnetic holders. Made to measure in France.
    기술 사양
    • 특징 참조SFR020004
    • 제품군Garage doors
    • 제품분류SAFIR S424
    • 유형개체 (단일 개체)
    • 게시일2020-01-14
    • 에디션 넘버1
    관련성
    • 설계국가프랑스
    • 제조국가프랑스
    분류
    • BIMobject 카테고리문 - 차고 문

    지역 가용성

    유럽
    프랑스
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득