제품 게시
AEROTUBE DD 110
AEROTUBE DD 110
    SIEGENIA

    AEROTUBE DD 110

    With the AEROTUBE all functional elements are positioned in the pipe. This gives the casing a discreet design, while nevertheless providing demand-based, controlled ventilation to a very high level of comfort. The AEROTUBE system consists of four different unit versions, which can be used singly or in pairs – and also across rooms and which; in the "smart" versions, can be intelligently and effortlessly networked with one another and operated via the SIEGENIA Comfort app. Hence, you have the right solution for every room; in new builds or in renovations.

    사양
    • Two passive ventilator versions with different pipe diameters.

      With the versions AEROTUBE DD 110 and 160, the AEROTUBE system also covers the requirements of passive ventilation on the basis of the natural pressure differential. Three different pipe diameters of 110, 150 or 160 mm provide the necessary flexibility for planning. The optional vent duct can be used for an undisturbed facade view and increased sound absorption values of up to 72 dB.

      AEROTUBE DD 110 or 160 mode of operation at a glance:

      • Air supply and extraction on a pressure differential basis
      • Cross ventilation (at least two devices required)
      • AEROTUBE DD 160: can be subsequently upgraded to AEROTUBE WRG smart or AEROTUBE AZ smart
    기술 사양
    • 특징 참조aerotube_dd_110
    • 제품군Ventilation systems
    • 제품분류Wall-mounted ventilators
    • 유형개체 (단일 개체)
    • 게시일2019-01-04
    • 에디션 넘버1
    • 높이(mm)178
    • 너비(mm)178
    • 깊이(mm)11
    관련성
    • 주 재료플라스틱
    • 설계국가독일
    • 제조국가독일
    분류
    • BIMobject 카테고리HVAC - 비기계식 환기 장치
    • IFC 분류에어 터미널
    • UNSPSC 이름Ventilation
    • UNSPSC 코드401015
    • Uniclass 2015 코드EF_65_40
    • Uniclass 2015 설명Ventilation
    • CSI 마스터 형식 2014 코드23 00 00
    • CSI 마스터 형식 2014 제목Heating, Ventilating, and Air Conditioning (HVAC)
    • OmniClass 번호23-33 25 15
    • OmniClass 제목Heating and Ventilating Units
    • CSI 단일 형식 II 코드D3040
    • CSI 단일 형식 II 제목Distribution Systems

    지역 가용성

    유럽
    건지
    그리스
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    맨섬
    모나코
    몬테네그로
    몰도바
    몰타
    바티칸 시국
    벨기에
    벨로루시
    보스니아 헤르체고비나
    북마케도니아
    불가리아
    산마리노
    세르비아
    스발바르 얀마옌 제도
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    안도라
    알바니아
    에스토니아
    영국
    오스트리아
    올란드 제도
    우크라이나
    이탈리아
    저지섬
    지브롤터
    체코 공화국
    크로아티아
    키프러스
    페로 제도
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득