제품 게시
Tekmar Smart Boiler Expansion 294EXP
Watts

Tekmar Smart Boiler Expansion 294EXP

The Smart Boiler Expansion 294EXP expands the Smart Boiler Control 294 in groups of four boilers up to a maximum of sixteen boilers. The 294EXP connects to the Smart Boiler Control 294 through a three-wire communication cable.

Features

  • LED status indicators for power, communication, each boiler and pump/valve
  • Expansion for 4 boilers
  • 3-wire communication
  • Boiler configuration selected by DIP switches
사양
  • Specifications
    Agency ApprovalsCSA C US, FCC Part 15B, ICES-003 Class A
    Ambient ConditionsIndoor use only, 32 to 122 degrees F (0 to 50 degrees C), less than 90 percent RH Non-condensing, Altitude < 6560 feet (2000 m), Installation Category II, Pollution Degree 2
    Dimensions9" H x 8" W x 2-11/32" D (229 x 203 x 60 mm)
    Enclosure MaterialBlue ABS plastic
    Enclosure NEMA RatingNEMA 1
    Modulating Output0-10 V (dc) 500 ohms minimum load impedance / 4-20 mA 1 k ohms max load impedance
    Power Supply115 V (ac) plus / minus 10 percent, 60 Hz, 6W
    Pump Relay230 V (ac), 5A, 1/3 hp


    기술 사양
    • 특징 참조tekmar-294EXP
    • 제품군HVAC & Hot Water Solutions
    • 제품분류Controls > Multi-Staging
    • 유형개체 (단일 개체)
    • 게시일2022-08-04
    • 에디션 넘버1
    관련성
    • 설계국가캐나다
    • 제조국가캐나다
    분류
    • BIMobject 카테고리전기 - Controls
    • IFC 분류전기 소자
    • UNSPSC 이름Electrical controls and accessories
    • UNSPSC 코드391215
    • Uniclass 2015 코드Pr_80_51
    • Uniclass 2015 설명Measuring and metering products
    • CSI 마스터 형식 2014 코드26 09 16
    • CSI 마스터 형식 2014 제목Electrical Controls and Relays
    • OmniClass 번호23-27 11 15
    • OmniClass 제목Flow Measuring Instrument And Controls
    • CSI 단일 형식 II 코드D3060
    • CSI 단일 형식 II 제목Controls and Instrumentation

    지역 가용성

    북미
    미국
    캐나다
    BIMobject 제품 라이브러리

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득