한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.
새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.
Revit 바로 옆에서 BIM 개체로 직접 작업
2GB 클라우드 스토리지 - Revit 콘텐츠 저장
Revit에서 바로 내재 탄소 LCA(A1-A3) 획득
The Connected Flood Control System (Model FCIS) shall consist of a Reduced Pressure Principle Assembly (RP) (Model 375ASTW1, 375AW1, 375W1), a Solenoid Control Valve(SCV) (Model ZW206), and a Zurn Relief Valve Monitor and shall be constructed and tested at the factory as a complete assembly. The RP shall be certified to NSF/ANSI/CAN 61 & 372, and shall be ASSE 1013 Listed. The RP shall be furnished with full port, resilient seated shut-off valves, and shall be equipped with an integral Relief Valve Monitor that monitors the Relief Valve in a closed position. The seat ring and the check valves shall be Noryl, the stems and springs shall be Stainless Steel, and the elastomers shall be EPDM. The SCV shall be a single seated, line-pressure-operated, diaphragm-actuated, pilot-controlled valve. The SCV shall seal by means of a corrosion-resistant seat and a resilient, rectangular seat disc. The stem of the SCV shall be guided top and bottom by integral bushings, and shall contain no packing glands or stuffing boxes. The SCV shall be protected with internal and external FDA approved epoxy coating, and the diaphragm shall not be used as a seating surface. The Relief Valve Monitor shall have an input voltage of 120 VAC, and shall be provided with an output of 24 VDC controlled by a relay. The Relief Valve Monitor shall be housed in a water-tight NEMA enclosure, and shall have both normally open and normally closed outputs. The three components, the RP, SVC, and Relief Valve Monitor, when combined together, automatically shut off the water supply in the event of catastrophic relief valve discharge. The Reduced Pressure Principle Assembly, Solenoid Control Valve, and assembled as a complete unit shall be the WILKINS FCIS.
Compliance:
Features:
지역 가용성
| 북미 |
|---|
과들루프 |
과테말라 |
그레나다 |
그린란드 |
네덜란드령 카리브 해 지역 |
니카라과 |
도미니카 |
도미니카 공화국 |
마르티니크 |
멕시코 |
몬세라트 |
미국 |
미국령 버진아일랜드 |
바베이도스 |
바하마 |
버뮤다 |
벨리즈 |
생마르탱 |
생바르텔레미 |
생피에르앤드미클롱 |
세인트루시아 |
세인트빈센트그레나딘 |
세인트키츠네비스 |
신트마르턴 |
아루바 |
아이티 |
앤티가 바부다 |
앵귈라 |
엘살바도르 |
영국령 버진아일랜드 |
온두라스 |
자메이카 |
캐나다 |
케이맨 군도 |
코스타리카 |
쿠바 |
퀴라소 |
터크스케이커스 제도 |
트리니다드토바고 |
파나마 |
푸에르토리코 |

Revit용 Design App
한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.
새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.