Om u beter van dienst te kunnen zijn, maakt BIMobject gebruik van cookies.

Als je onze site blijft gebruiken, ga je akkoord met het gebruik van deze cookies.

  1. BIMobject
  2. Merken
  3. Rheem Manufacturing Company
  4. Producten
  5. Commercial Condensing Tankless - Indoor
Commercial Condensing Tankless - Indoor
Commercial Condensing Tankless - Indoor

Commercial Condensing Tankless - Indoor

Unieke ref.: RGTH_C_indoor
Fabrikant: Rheem Manufacturing Company
Product familie: Tankless
Product groep: Commercial Gas
Breedte (inches): 18.5
Hoogte (inches): 27.5
Diepte (inches): 9.75
Publicatiedatum: 2018-09-10
Editie nummer: 1
Type: Object (enkelvoudig object)
Download (9)

Efficiency

  • Up to 96% Thermal Efficiency with stainless steel condensing heat exchanger
  • Intelligent electronic controls designed to increase energy efficiency and safety

Performance

  • Low flow fixture compatible – Industry minimum flow rate of .26 GPM and minimum activation flow rate of .40 GPM ensures the user will receive hot water even in low demand situations
  • Recirculation Pump Kit-Ready – Quickly pairs with our Recirculation Pump kit to provide instantaneous hot water at the tap2

Easy Installation and Service

  • Ability to vent with room air
  • Indoor, Natural Gas units are common vent compatible up to 10 units
  • Common venting with Polypropelene 
  • Built-in condensate neutralizer
  • 1/2" Gas line compatibility on every model
  • Exclusive! Maintenance Notice Setting Alerts – flashing a warning code to call for service check
  • Self-diagnostic system for easy installation and service
  • Digital display shows temperature setting and maintenance codes
  • Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3" PVC pipe or 5 ft. of 2" PVC pipe)
  • High altitude capability up to 8,400 ft
  • Commercial Project Sizing Available from Rheem Applications Engineers
  • Digital remote control and 10 ft. of thermostat wire included
  • Freeze protection to -30°F

Technology

  • Manifold control models - with factory installed translator links up to 20 units
  • Hot-start programming - helps minimize fluctuation in water temperature, referred to as “cold water sandwich”, during periods of frequent on/off operation
  • Exclusive! Overheat film wrap with industry-best side to side clearance of 1/2 inch

Parts & Accessories

  • EZ Rack Kit
  • Common Venting: Direct Vent & Room Air header kits
  • AllClear®  Water Treatment System


Primair materiaal: Stainless steel
Secundair materiaal:
Ontworpen in : United States
Vervaardigd in : United States
Netto gewicht (pond): 82

BIMobject categorie: HVAC - Water Heaters
Uniclass 1.4 Code : L71134
Uniclass 1.4 Beschrijving: Instantaneous water heaters
Uniclass 2.0 Code : SS-55-70-40-45
Uniclass 2.0 Beschrijving: Instantaneous Hot Water Supply Systems
Uniclass 2015 Code : Ss_55_70_38_45
Uniclass 2015 Beschrijving: Instantaneous hot water supply systems
CSI MasterFormat 2014 Code: 22 34 13
CSI MasterFormat 2014 Title: Instantaneous, Tankless, Gas Domestic Water Heaters
OmniClass nummer: 23-31 29 11 13
OmniClass Titel: Gas Instantaneous Hot Water Heaters
Dit product is beschikbaar in :
North America
  • Canada
  • United States

BIMobject SEEK Properties

HVAC - Water Heaters

Naam Waarde
Cold Water Connection Size 0.75
Depth 9.75
Flow Rate 0.26 gpm — 9.5 gpm
Gas Connection Size 0.75
Height 27.5
Hot Water Connection Size 0.75
Hot Water Outlet Connection Size 0.75
Ignition Type Forced Combustion
Input Rating Btu/hr 11000 % — 199900 %
Shipping Weight 82
Thermal Efficiency 95 % — 96 %
Total Height 27.5
Width 18.5

Alle BIM objecten zijn echte producten van echte fabrikanten bevestigd en goedgekeurd door de fabrikanten