| Sound Absorption | αw: 0.90 (Class A) |
| Reaction to Fire | B-s1,d0 |
| Light Reflection | 74% |
| Humidity and Sag Resistance | Up to 100% RH. No visible deflection in high humidity. |
| Surface Durability | The high-performance inert film of Rockfon CleanSpace Block provides enhanced durability and water-repellence. The film contains DMAc (CAS 127-19-5) in a concentration ≥ 0.1% and < 1% by weight. |
| Cleaning | • Vacuum • Damp cloth • Steam cleaning (twice a year) • Low-pressure foam cleaning (12×/year) • High pressure cleaning (monthly and only applicable for A-edge installation). Max. 80 bar, min. 1 meter distance, water spread at 30° angle, max. water flow 360 L/h.
Tiles must be clipped into the grid.
Chemical resistance: Tested according to ISO 2812-1 (“Determination of resistance to liquids - Part 1: Immersion in liquids other than water”) and classification in accordance with VDI 2083 Part 17. Results are classified as ‘Excellent’ with the following detergents and disinfectants (daily disinfection): – Formalin (37%) – Ammonia (25%) – Hydrogen peroxide (30%) – Sulphuric acid (5%) – Phosphoric acid (30%) – Peracetic acid (15%) – Hydrochloric acid (5%) – Isopropanol (100%) – Sodium hydroxide (5%) – Sodium hypochlorite (15%) Use only soft equipment directly on the tile surface: cloth or sponge. Avoid scraping or stiff brush rubbing. |
| Disinfection | • Resistant to Hydrogen Peroxide Vapor (no impact on aeration time) • Withstands UVC and Ozone disinfection without degradation |
| Clean Room Classification | ISO Class 2 |
| Air Pressure | Suitable for areas requiring differential pressure.
When used in combination with: -HDC 2 for the 25 mm tile; the air leakage rate of less than 0.5m³/h/ m²/Pa under a pressure range of 5 to 40 Pa is achieved. The amount of hold down clips (HDC) depends on the tile dimensions and the room size/shape. For more information please contact customer service. |