Publiceer je producten

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

The Viking Corporation

Gearchiveerd

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

Viking Standard Response Dry Pendent Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings are listed/approved for installation in corrosive environments. Refer to technical data sheet for design and installation requirements.

Specificatie

K-Factor: K5.6 (80)
Manufacturer: Viking
Page: F_071591
Part Number: 07740U,07854U,09341,06530U,07853U,09342,07852U,07855U,09343
VK Number: VK154
Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Extra, Light, Ordinary
Thread Size: 1" NPT (25 mm BSP)
Min Spacing: 6 ft (1,8 m) cULus; Per FM datasheet
Max Spacing: Per Standards / Listings

Technische specificatie

Unieke ref.vk154-standard-response-pendent-sprinkler-k56
ProductfamilieViking Dry Barrel Sprinklers
ProductgroepViking - Dry Pendent Adjustable Esc / Pendent
TypeObject (enkelvoudig object)
Publicatiedatum2021-01-25
Editienummer1

Links

Product-urlhttps://www.vikinggroupinc.com/vk150-vk151-vk154-vk155-vk158-vk159-standard-response-dry-pendent-sprinklers-k56
Productcertificeringhttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf
Technische beschrijvinghttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf

Gerelateerd

Ontworpen inVerenigde Staten
Gefabriceerd inVerenigde Staten

Classificatie

Categorie BIMobjectBrandwerende producten - Sproeisystemen
ETIM-codeEC011373
ETIM-naamDry sprinkler
UNSPSC-naamFire sprinkler heads
UNSPSC-code46191610
Uniclass 2015-codePr_70_55_97_84
Uniclass 2015-beschrijvingSprinkler heads
CSI MasterFormat 2014 Code21 13 00
CSI MasterFormat 2014 TitelFire-Suppression Sprinkler Systems
OmniClass-nummer23-29 33 11 11 13
OmniClass-titelDry Pendant Sprinkler Heads
CSI UniFormat II-codeD4010
CSI UniFormat II-titelSprinklers

Soortgelijke producten

afbeelding voor Wilkins FP53 - Tees

Zurn Wilkins FP53 - Tees

4.4 (7)

afbeelding voor Wilkins FP56 - Crosses

Zurn Wilkins FP56 - Crosses

3.8 (5)

afbeelding voor Model 2500 TESTanDRAIN® - Grooved Single Handle Ball Valve

AGF Manufacturing Model 2500 TESTanDRAIN® - Grooved Single Handle Ball Valve

afbeelding voor Model 1000 TESTanDRAIN® - Single Handle Ball Valve

AGF Manufacturing Model 1000 TESTanDRAIN® - Single Handle Ball Valve

afbeelding voor Model 7950 PURGEnVENT Automatic In-Line Air Vent (ILV)

AGF Manufacturing Model 7950 PURGEnVENT Automatic In-Line Air Vent (ILV)

afbeelding voor Model 5300A COLLECTanDRAIN - Auxiliary Drain

AGF Manufacturing Model 5300A COLLECTanDRAIN - Auxiliary Drain

Common.Footer.ValueProp.Image.AltText

Design-app voor Revit

Laad families rechtstreeks in je Revit-model met één klik.

Vind een plek om eenvoudiger toegang te krijgen tot nieuwe objecten, sla je Revit-families op en werk samen met je team.

Werk rechtstreeks met BIM-objecten naast Revit
2 GB cloudopslag - sla uw Revit-content op
Krijg belichaamde koolstof-LCA (A1-A3) rechtstreeks vanuit Revit