Publiceer je producten
Wilkins FCIS Connected Flood Control System
Wilkins FCIS Connected Flood Control System
Wilkins FCIS Connected Flood Control System
    Wilkins

    Wilkins FCIS Connected Flood Control System

    The Connected Flood Control System (Model FCIS) shall consist of a Reduced Pressure Principle Assembly (RP) (Model 375ASTW1, 375AW1, 375W1), a Solenoid Control Valve(SCV) (Model ZW206), and a Zurn Relief Valve Monitor and shall be constructed and tested at the factory as a complete assembly. The RP shall be certified to NSF/ANSI/CAN 61 & 372, and shall be ASSE 1013 Listed. The RP shall be furnished with full port, resilient seated shut-off valves, and shall be equipped with an integral Relief Valve Monitor that monitors the Relief Valve in a closed position. The seat ring and the check valves shall be Noryl, the stems and springs shall be Stainless Steel, and the elastomers shall be EPDM. The SCV shall be a single seated, line-pressure-operated, diaphragm-actuated, pilot-controlled valve. The SCV shall seal by means of a corrosion-resistant seat and a resilient, rectangular seat disc. The stem of the SCV shall be guided top and bottom by integral bushings, and shall contain no packing glands or stuffing boxes. The SCV shall be protected with internal and external FDA approved epoxy coating, and the diaphragm shall not be used as a seating surface. The Relief Valve Monitor shall have an input voltage of 120 VAC, and shall be provided with an output of 24 VDC controlled by a relay. The Relief Valve Monitor shall be housed in a water-tight NEMA enclosure, and shall have both normally open and normally closed outputs. The three components, the RP, SVC, and Relief Valve Monitor, when combined together, automatically shut off the water supply in the event of catastrophic relief valve discharge. The Reduced Pressure Principle Assembly, Solenoid Control Valve, and assembled as a complete unit shall be the WILKINS FCIS.

    Compliance:

    • NSF Standard 61
    • NSF Standard 372
    • ASSE® Listed 1013
    • CSA® Certified B64.4
    • cUPC listed
    • UL listed
    • IPC listed
    • NPCC listed
    • Product USC Approved
    • Product FM Approved

    Features:

    • Ideal for installation in areas not immediately visible where undetected relief valve discharge could potentially cause catastrophic flooding and water damage.
    • Automatic shutoff of the water system reduces potential for costly flooding damage
    • 24/7 relief water discharge data provides secure real-time monitoring and notifications
    • Customizable water shutoff timer
    • The pre-wired FCIS package includes a Model 375W1, 375AW1 or 375ASTW1 
    • Reduced Pressure Principle Backflow Preventer and is attached to a Model ZW206 ACV Solenoid Control Valve.
    • Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
    • Reduced Pressure Principle Assembly is AWWA compliant C511 (with gates only ) and C550
    Specificatie
    • Zurn Connected Flood Control Systems transmit data 24/7 to the Zurn plumbSMART™ web portal and mobile app. Proactively monitor your relief water discharge and optional system pressure data, receive real-time alerts for relief valve discharge occurrences, and access system data for trends and predictive maintenance anytime and anywhere. Zurn Connected Flood Control Systems are designed to prevent flooding of a building caused by discharge from a catastrophically fouled Reduced Pressure Principle backflow preventer. The pre-wired FCIS package includes a Model 375W1 Reduced Pressure Principle Backflow Preventer that detects relief valve discharge in real-time, and is attached to a Solenoid Control Valve to shut off the water supply when excessive discharge happens using a built-in relief valve position switch with adjustable time delay.

    Technische specificatie
    • Unieke ref.zurn-fcis
    • ProductfamilieBackflow Preventers
    • ProductgroepReduced Pressure Principle Assembly, Detector
    • TypeObject (enkelvoudig object)
    • Publicatiedatum2025-09-02
    • Editienummer1
    • Hoogte (inch)27.25
    • Breedte (inch)14.25
    • Diepte (inch)43
    Gerelateerd
    • HoofdmateriaalDuctile Iron
    • Secundair materiaalRoestvrij staal
    • Ontworpen inVerenigde Staten
    • Nettogewicht (lbs)153
    Classificatie
    • Categorie BIMobjectLoodgieterswerk - Kleppen

    Beschikbaarheid regio

    Noord Amerika
    Amerikaanse Maagdeneilanden
    Anguilla
    Antigua en Barbuda
    Aruba
    Bahama's
    Barbados
    Belize
    Bermuda
    Britse Maagdeneilanden
    Canada
    Caribisch Nederland
    Costa Rica
    Cuba
    Curaçao
    Dominica
    Dominicaanse Republiek
    El Salvador
    Grenada
    Groenland
    Guadeloupe
    Guatemala
    Haïti
    Honduras
    Jamaica
    Kaaimaneilanden
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Porto Rico
    Saint Kitts en Nevis
    Saint Martin
    Saint Vincent en de Grenadines
    Saint-Barthélemy
    Saint-Pierre en Miquelon
    SaintLucia
    Sint Maarten
    Trinidad en Tobago
    Turks- en Caicoseilanden
    Verenigde Staten
    Common.Footer.ValueProp.Image.AltText

    Design-app voor Revit

    Laad families rechtstreeks in je Revit-model met één klik.

    Vind een plek om eenvoudiger toegang te krijgen tot nieuwe objecten, sla je Revit-families op en werk samen met je team.

    • VinkjeWerk rechtstreeks met BIM-objecten naast Revit
    • Vinkje 2 GB cloudopslag - sla uw Revit-content op
    • Vinkje Krijg belichaamde koolstof-LCA (A1-A3) rechtstreeks vanuit Revit