Publiceer je producten
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar
    ARDEX

    ARDEX X 90 OUTDOOR™ - Rapid-Set, Flexible Tile and Stone Mortar

    Weather resistant tile adhesive with ARDEX Weather Proof Technology

    ARDEX WEATHER PROOF TECHNOLOGY: Ready for any weather! High initial strength even at low temperatures, highest frost-thaw change resistance, long processing time even at high temperatures and after only 2 hours drip-proof. With the innovative ARDEX X 90 OUTDOOR MICROTEC3 flexible adhesive you are well prepared for the unpredictability of the weather. Because when working outdoors, the weather conditions play a crucial role. But these are often unpredictable. That's why working outdoors is always associated with a certain risk. Equipped with the new ARDEX WEATHER PROOF TECHNOLOGY, ARDEX X 90 OUTDOOR offers maximum installation safety even in difficult weather conditions. Furthermore, ARDEX X 90 convinces with excellent processing properties such as fully-saturated embedding without fluid bed behavior and a variable consistency setting. ARDEX X 90 OUTDOOR meets the requirements C2 FTE S1 according to EN 12004/12002 and is very low emission EC 1 PLUS R according to GEV EMICODE.

    Cool weather does not provide the ideal conditions for laying tiles and slabs on balconies and terraces. However, laying under these conditions is often unavoidable. ARDEX X 90 OUTDOOR is a cementitious laying mortar which fulfills the properties of a fast adhesive even at cool temperatures and can be walked on and supplied after approx. 3 hours. Thus, the ARDEX X 90 OUTDOOR offers high composite security even at low temperatures. In addition, ARDEX X 90 is equipped with the new MICROTEC3 technology and exceeds the C2 freeze-thaw change requirements according to EN 12004 many times over. So even frequent temperature changes around the freezing point can not damage the adhesive.

    It often happens that when laying balconies and terraces very warm temperatures prevail. These can be air, but also underground temperatures. Conventional instant adhesives are even faster, and therefore hold a very high risk potential for later damage by a very short processing and insertion time. Thanks to its special formulation, the ARDEX X 90 OUTDOOR retains a high processing time, even at high temperatures. The covering can thus be laid comfortably and safely even at high temperatures.

    No damage from heavy rainfall. Even in the most glorious weather and sunshine, it can happen that during laying on balconies and terraces, thunderstorms and rain showers. Such sudden and unexpected showers can lead to excessive flushing of various constituents in the still fresh adhesive during the setting phase and thus permanently disrupt or weaken the adhesive bond. After only 2 hours, the ARDEX X 90 OUTDOOR is resistant to showers and driving rain, providing a further safety component for damage-free outdoor installation.

    Product Highlights:

    • Fast setting even at low temperatures
    • Highest frost-thaw change resistance
    • Driving rain-proof after two hours 
    • Long processing time even at high temperatures 
    • Walkable after approx. 3 hours
    Specificatie
    • Technical specifications

      bulk weight
      approx. 1.10 kg / l

      fresh weight
      approx. 1.60 kg / l

      Processing time at + 20 ° C
      approx. 60 min

      Working time
      approx. 30 min (measured on fresh mortar)

      Accessibility at + 20 ° C
      after approx. 3 h

      underfloor heating fitness
      Yes

      EMICODE
      EC1
       
      packing
      Bags with 25.00 kg net

      storage
      Can be stored in dry rooms for approx. 12 months in the original sealed container.

      Mixing ratio
      approx.  8.50 l water:  25.00 kg  ARDEX X 90 OUTDOOR

      Correction time
      approx. 15 min - 20 min

      GISCODE
      ZP 1 = cementitious product

      Bond strength
      for stoneware tiles after 28 days
      dry, wet approx. 1.0 - 2.0 N / mm 2
      warm approx. 1.0 - 1.5 N / mm 2
      Frost-thaw change 1.0 - 1.5 N / mm 2

      material requirements
      approx. 1.10 kg / m² of powder with toothing 3 x 3 x 3 mm
      approx. 2.10 kg / m² powder with toothing 6 x 6 x 6 mm
      approx. 2.60 kg / m² powder with toothing 8 x 8 x 8 mm
      approx. 3.20 kg / m² powder with toothing 10 x 10 x 10 mm
      approx. 4.60 kg / m² of powder with MICROTEC toothing 12 x 10 x 15 mm

      Joints on the wall
      After 2 h

    Technische specificatie
    • Unieke ref.ardex-x-90-outdoor
    • ProductfamilieTile & Stone Installation System
    • ProductgroepMicrotec Rapid Set Flexible Tile and Stone Mortar
    • TypeObject (enkelvoudig object)
    • Publicatiedatum2019-10-07
    • Editienummer1
    Gerelateerd
    • Ontworpen inVerenigde Staten
    Classificatie
    • Categorie BIMobjectVloeren - Tiles
    • IFC-classificatieFloor
    • UNSPSC-naamStone or tile flooring
    • UNSPSC-code30161706
    • Uniclass 2015-codeEF_30_20
    • Uniclass 2015-beschrijvingFloors
    • CSI MasterFormat 2014 Code09 90 00
    • CSI MasterFormat 2014 TitelPainting and Coating
    • OmniClass-nummer23-15 17 13 13
    • OmniClass-titelTile Flooring
    • CSI UniFormat II-codeB1010
    • CSI UniFormat II-titelFloor Construction

    Beschikbaarheid regio

    Noord Amerika Europa Azië
    Amerikaanse Maagdeneilanden
    Denemarken
    Singapore
    Anguilla
    Duitsland
    Thailand
    Antigua en Barbuda
    Frankrijk
    Aruba
    Ierland
    Bahama's
    Italië
    Barbados
    Oostenrijk
    Belize
    Polen
    Bermuda
    Rusland
    Britse Maagdeneilanden
    Tsjechië
    Canada
    Zweden
    Caribisch Nederland
    Costa Rica
    Cuba
    Curaçao
    Dominica
    Dominicaanse Republiek
    El Salvador
    Grenada
    Groenland
    Guadeloupe
    Guatemala
    Haïti
    Honduras
    Jamaica
    Kaaimaneilanden
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Porto Rico
    Saint Kitts en Nevis
    Saint Martin
    Saint Vincent en de Grenadines
    Saint-Barthélemy
    Saint-Pierre en Miquelon
    SaintLucia
    Sint Maarten
    Trinidad en Tobago
    Turks- en Caicoseilanden
    Verenigde Staten
    Common.Footer.ValueProp.Image.AltText

    Design-app voor Revit

    Laad families rechtstreeks in je Revit-model met één klik.

    Vind een plek om eenvoudiger toegang te krijgen tot nieuwe objecten, sla je Revit-families op en werk samen met je team.

    • VinkjeWerk rechtstreeks met BIM-objecten naast Revit
    • Vinkje 2 GB cloudopslag - sla uw Revit-content op
    • Vinkje Krijg belichaamde koolstof-LCA (A1-A3) rechtstreeks vanuit Revit