Om u beter van dienst te kunnen zijn, maakt BIMobject gebruik van cookies.. Als je onze site blijft gebruiken, ga je akkoord met het gebruik van deze cookies..
;

TTE grid

Unieke ref.: dalle-tte
Fabrikant: O2D Environnement
Product familie: Grid
Product groep: TTE
Breedte (mm): 800
Hoogte (mm): 60
Diepte (mm): 400
Publicatiedatum: 2019-09-18
Editie nummer: 1
Type: Object (enkelvoudig object)
Download (12)

TTE® grids are a permeable floor covering which permit the natural infiltration of rainwater on surfaces which are designed for the circulation of vehicles and persons.

O2D ENVIRONNEMENT has developed green and mineral-based systems for the deployment of permeable parking spaces, drainage-enhanced carpark access roads, grassed parking spaces, drainage-enhanced paved or gravel parking spaces, green emergency service access roads, PRM-accessible permeable pedestrian walkways, internal courtyards, etc.

Technical advantages of TTE® grids:

- Resistance and distribution of loads
Exceptional static load resistance: 10 Newtons/mm² (equivalent to 1,000 tonnes/m²). Optimum lateral load distribution delivered by the structure of grids, their assembly system and the large ground contact surface area.

- Versatility of infills on a single foundation structure
Flexibility of design for layouts incorporating considerations of use and landscaping preferences: 100% green, grassed with paved tread surfaces, checkerboard paving/grassing, etc.

- Protection of grass
14 mm cellular wall thickness and recommended infill to a level of -1 cm for the optimum protection of the root structure of grass.

Environmental benefits:
- Conservation of water resources
- Reduction of the urban heat island effect
- Conducive to the biodiversity of soils

Applications:
- Green parking spaces
- Permeable paved parking spaces
- Permeable gravel parking spaces
- Permeable light vehicle access roads
- Green emergency service access roads
- PRM-accessible permeable parking spaces
- Pedestrian or cycle paths

Each system developed by O2D ENVIRONNEMENT is comprised of a base covering (TTE® grids), an infill and an appropriate foundation composition.
•  TTE MULTIDRAIN system: TTE® grids for grassing + fertile foundation materials
•  O2D GREEN system: pre-grassed TTE® grids + fertile foundation materials
•  O2D PAVE system: TTE® grids for paving infill + mineral foundation materials
•  O2D MINERAL system: TTE® grids for gravel infill + mineral foundation materials

A genuinely green material, TTE® grids are produced from recycled household wastes, using the German DUAL system. This material represents the outcome of a high-grade recycling system, from the collection of domestic household packaging through to industrial processing. Recycled, recyclable and reversible, this material contributes to the achievement of a circular economy.

The TTE® system is recommended in the context of development projects which incorporate the sustainable management of rainwater. It provides an alternative to porous surfacing, green concrete foundation slabs or paving slabs with plant growth between joints. This system has been specifically developed for the finishing of permeable and green parking spaces and access roads. The TTE® system provides a technical response to the dictates of load-bearing, infiltration and long-term sustainability of grassing, whilst ensuring successful landscape integration thanks to the versatility of infills.

TTE® grids are available:
•  unfilled, for filling with paving (O2D PAVE) or gravel (O2D MINERAL), or for grassing in situ (TTE MULTIDRAIN for grassing)
•  pre-grassed (O2D GREEN)

TTE® paving is specially-designed concrete paving for insertion in the cells of TTE® grids. This system is employed for the marking and demarcation of parking spaces, or for the creation of fully-paved, drainage-enhanced parking spaces, pedestrian walkways or cycle paths with PRM-access.

Technical information on TTE® grid

Product name:
TTE® MultidrainPlus grid

Material:
100% recycled and recyclable domestic mixed plastic – German DUAL system

Dimensions:
Approximate dimensions: length 80 x width 40 x height 6 cm (+/- 2mm), comprised of 32 cells of dimensions 8 x 8 cm (1 m² = 3.125 grids)

Colouring of grids:
Anthracite grey (variable)

Weight - unladen:
Approximately 9 kg/grid, or approximately 28 kg/m² unladen

Weight – pre-grassed:
Approximately 22 kg/grid, or approximately 69 kg/m² pre-grassed

Surface finish:
Anti-slip ribs of thickness 2 mm

Underside:
T-profile support width of approximately 4.2 cm – 1.5 cm assembly joint on either side

Static load resistance:
10 Newtons/mm² (equivalent to 1,000 tonnes/m²)

Puncture resistance:
> 100 kN on a surface of diameter 20 cm (compliant for emergency service roadways) – GINGER CEBTP certification

Axle loading:
20 tonnes (147 kN)/unit of 4 unladen cells (20 x 20 cm) – Certified by the TÜV SUD (official German certification organization)

Technical information on TTE® concrete paving

Product name:
TTE® concrete paving

Dimensions:
Length 7.4 x width 7.4 x height 4.9 cm

Colours available:
Grey, red, anthracite, yellow stone, brown, white, green, blue, pink

Weight:
615 g/paving stone


Primair materiaal: Polyethylene
Secundair materiaal: Polypropylene
Ontworpen in : Germany
Vervaardigd in : Belgium
Netto gewicht (kg): 9

BIMobject categorie: Bouwmaterialen - Klinkers en stenen
IFC classificatie: Object
UNSPSC naam: Paving blocks
UNSPSC code: 30171701
Uniclass 1.4 Code : JQ2
Uniclass 1.4 Beschrijving: Pavings
Uniclass 2.0 Code : EE-20-60-75
Uniclass 2.0 Beschrijving: Paving Drainage
Uniclass 2015 Code : Ss_30_14
Uniclass 2015 Beschrijving: Paving systems
NBS Reference Code : 20-14
NBS Reference Beschrijving: Paving Systems
OmniClass nummer: 23-11 21 17
OmniClass Titel: Paving Blocks
Dit product is beschikbaar in :
Africa
  • Reunion
Europe
  • Belgium
  • France
  • Luxembourg
  • Switzerland
North America
  • Guadeloupe
  • Martinique
  • Saint Pierre and Miquelon
Oceania
  • New Caledonia
  • Wallis and Futuna
South America
  • French Guiana

BIMobject SEEK Properties

Building Materials - Pavers & Stones

Naam Waarde
Height 60 mm
Length 400 mm — 800 mm
Material Recycled PE PP
Width 400 mm

COBie UK

UK.COBie.Component

UK.COBie.Component

This property set allows objects to be COBie UK BIM Level 2 classified

Naam Waarde
Length 400 mm — 800 mm
UK.COBie.Type

UK.COBie.Type

This property set allows objects to be COBie UK BIM Level 2 classified

Naam Waarde
Material Recycled PE PP

BIMobject®