Om u beter van dienst te kunnen zijn, maakt BIMobject gebruik van cookies.. Als je onze site blijft gebruiken, ga je akkoord met het gebruik van deze cookies..

O2D Mineral Foundation for access road

Unieke ref.: mineral-foundation-access-road
Fabrikant: O2D Environnement
Product familie: Foundation
Product groep: Mineral
Hoogte (mm): 180
Publicatiedatum: 2019-09-11
Editie nummer: 1
Type: Object (enkelvoudig object)
Download (5)

O2D mineral foundation for light vehicle access roads is recommended in the context of the development of paved access roads for permeable parking spaces.

This foundation material, which is recommended by O2D ENVIRONNEMENT, is comprised of open-graded crushed roadbed, with no fine particles. The technical characteristics of this mineral foundation material have been defined in conjunction with the TTE® permeable floor covering: TTE® grids for paving infill (O2D PAVE).

Recommended composition of mineral foundation:

• 15 cm thickness: 2/20 mm or 2/32 mm crushed roadbed foundation
• 3 cm thickness: 2/4 mm or 4/6 mm crushed roadbed bearing course

Prepared base / sub-base (-23 cm in relation to level 0):

• The requisite permeability below this foundation system is such that K > 10-6 m/s
• The load-bearing level required is such that EV2 > 30 MPa (EV2/EV1 < 2)
• We recommend the installation of a permeable anti-contaminant geotextile membrane

This mineral foundation composition ensures both load-bearing capability and drainage.

It is recommended that the thickness of the sub-base (for example, 20/40 mm crushed drainage gravel) should be adjusted and/or any other facility should be incorporated, if the natural ground surface does not possess the requisite infiltration properties, or for the satisfaction of project design requirements.

The load-bearing level should be appropriate to the intended application.

- Permeable paved light vehicule access road

Recommended deployment for the creation of a mineral foundation for permeable paved light vehicle access roads:

- Preparation of base structure

         o  Mechanical or manual execution of excavation and backfill operations, up to the sides of the base structure: - 23 cm in relation to level 0
         o  Surface adjustment and levelling to an altimetric accuracy of +/- 2 cm/m
         o  Confirmation of a permeability coefficient K > 10-6 m/s
         o  Confirmation of the load-bearing capability of ground such that EV2 > 30 MPa, where EV2/EV1 < 2
         o  Clean-up of roadways employed

- Installation of edging to the concrete foundation, the shoulder of which, at its highest point, is 8 cm below the levelled surface.

- Installation of a permeable anti-contaminant geotextile membrane

- Execution of a draining foundation

         o  Adjustment, levelling and compaction of a foundation layer comprised of crushed roadbed of particle size 2/20 mm or 2/32 mm; finished thickness after rolling: 15 cm (or - 8 cm from the levelled edging surface).
         o  Levelling and compaction of a bearing course comprised of crushed roadbed of particle size 2/4 mm or 4/6 mm; finished thickness: 3 cm (or - 5 cm from the levelled edging surface).

- Installation of O2D FYNET laying mesh

- Installation of TTE® grids, with paving infill (O2D PAVE)

Primair materiaal: Aggregated natural stone
Secundair materiaal:
Ontworpen in : France
Vervaardigd in : France

BIMobject categorie: Bouwmaterialen - Klinkers en stenen
IFC classificatie: Floor
UNSPSC naam: Stone or tile flooring
UNSPSC code: 30161706
Uniclass 1.4 Code : L534
Uniclass 1.4 Beschrijving: Pavings
Uniclass 2.0 Code : SS-20-14
Uniclass 2.0 Beschrijving: Paving Systems
Uniclass 2015 Code : Ss_30_14
Uniclass 2015 Beschrijving: Paving systems
NBS Reference Code : 20-14
NBS Reference Beschrijving: Paving Systems
CSI MasterFormat 2014 Code: 32 01 19
CSI MasterFormat 2014 Title: Rigid Paving Surface Treatment
OmniClass nummer: 23-11 21 17
OmniClass Titel: Paving Blocks
CSI UniFormat II Code: B1010
CSI UniFormat II Title: Floor Construction
Dit product is beschikbaar in :
  • Reunion
  • Belgium
  • France
  • Luxembourg
  • Switzerland
North America
  • Guadeloupe
  • Martinique
  • Saint Pierre and Miquelon
  • New Caledonia
  • Wallis and Futuna
South America
  • French Guiana

BIMobject SEEK Properties

Building Materials - Pavers & Stones

Naam Waarde
Height 180 mm
Material Crushed stones




This property set allows objects to be COBie UK BIM Level 2 classified

Naam Waarde
Material Crushed stones