S.I.A.I.

LATERIZI ALVEOLATER BIO CLASSE 60

ALVEOLATER® lightweight blocks with horizontal holes are lightened clay bricks, characterized by a gross bulk density between 500 and 680 kg/m³ and a hole percentage of 55% ≤ φ ≤ 70%. They are suitable for building infill walls, including in seismic zones, with no load-bearing function. Their layer configurations are complemented by layers of insulating material (synthetic or mineral fiber) in a cavity or as external insulation ("cappotto"). ALVEOLATER® horizontal-hole clay blocks are "smooth" elements, produced in various sizes and thicknesses. Available thicknesses range from 10 to 35 cm.

Specificatie

Muratura in blocchi di laterizio alleggerito forato, tipo Alveolater® 60 marcati CE in cat I S.A.C. 2+ secondo UNI EN 771-1. Classificazione dei blocchi secondo ex UNI 8942: forato per tamponamento UNI BF 00- Classification of blocks according to standard UNI EN 771-1: LD Block dimensions: cm ……x cm …… and height of cm …… Dimensional tolerance ……… (T1, T2, Tm according to UNI EN 771-1) Tolerance range ……… (R1, R2, Rm according to UNI EN 771-1). Gross bulk density …………… kg/m³ Tolerance ……… (D1, D2, Dm according to UNI EN 771-1). Installation: horizontal holes with class M …… mortar Horizontal and vertical mortar joints. The blocks must have a hole percentage between 60 and 70%. The equivalent thermal conductivity of the block will be determined through the calculation set out in standard UNI EN 1745:2012, based on the conductivity value given in Table A1 of Appendix A of standard UNI EN 1745:2012 as a function of the bulk density of the raw material used, or on an experimental value obtained on the clays used at the production plant, according to the methods and testing frequency established by the aforementioned standard. All declared characteristics will be documented through the attestation required for CE marking purposes, indicating the Certification Body and the certificate number if manufactured under control system 2+. The U-value (thermal transmittance) must not exceed ……… W/m²K. The Sound Reduction Index Rw of the wall must be no lower than ……… dB, based on experimental testing or calculation. These performance characteristics may also be documented through a manufacturer's declaration, with specific reference to test reports and/or calculations.

Technische specificatie

Unieke ref.ALVEOLATER
TypeObject (enkelvoudig object)
Publicatiedatum2026-09-08
Editienummer1

Links

Gerelateerd

Ontworpen inItalië
Gefabriceerd inItalië

Classificatie

Categorie BIMobjectBouwmaterialen - Metselwerk
IFC-classificatieWall
OmniClass-nummer23-13 21 00
OmniClass-titelBlocks and Bricks

Beschikbaarheid regio

Europa
Åland
Albanië
Andorra
België
Bosnië en Herzegovina
Bulgarije
Cyprus
Denemarken
Duitsland
Estland
Faeröer
Finland
Frankrijk
Gibraltar
Griekenland
Guernsey
Hongarije
Ierland
IJsland
Isle of Man
Italië
Jersey
Kroatië
Letland
Liechtenstein
Litouwen
Luxemburg
Malta
Moldavië
Monaco
Montenegro
Nederland
Noord-Macedonië
Noorwegen
Oekraïene
Oostenrijk
Polen
Portugal
Roemenië
Rusland
San Marino
Servië
Slovenië
Slowakije
Spanje
Spitsbergen
Tsjechië
Vaticaanstad
Verenigd Koninkrijk
Wit-Rusland
Zweden
Zwitserland