Control and Display Tableau
ABB

Control and Display Tableau

4.8 av 5 stjerner4.8(5 anmeldelser)

For indication of switching status, fault reports and measurement values. Using the robust push buttons, electrical consumers can be manually switched, values can be set in addition to timer programs and light scenes. The alarms can also issue an acoustic warning. The FM wall box simplifies mounting.

Spesifikasjon
  • The display and control tableau
    MT 701.2 with an LC display is
    suitable for:
    – displaying switching states, fault
    signals and measured values,
    – central manual switching of loads,
    – setting lightscenes and time
    programs as well as
    – giving acoustic warning signals via
    the EIB.
    Additional to the display and control
    tableau, a flush-type box, intended for
    insertion in walls is supplied as a seperate product. The display and control
    tableau is connected to the EIB via a
    bus connecting terminal.
    Up to 8 lines can be shown on the
    LC display which has 240 x 128 pixels.
    It is operated using a freely programmable menu structure.

Tekniske spesifikasjoner
  • Unik ref.Control-and-Display-Tableau
  • ProduktfamilieKNX Visualisation, Display and Signalling Device
  • ProduktgruppeKNX range
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2020-12-21
  • Utgavenummer1
  • Høyde (mm)125
  • Bredde (mm)213
  • Dybde (mm)68
Relatert
  • HovedmaterialePlastikk
  • Sekundært materialeMetall
Klassifisering
  • BIMobject kategoriElektrisk - Adgangskontroll
  • Uniclass 2015 kodeAc_40_65_76
  • Uniclass 2015 beskrivelseScenery controlling
  • CSI MasterFormat 2014 kode01 45 00
  • CSI MasterFormat 2014 tittelQuality Control
  • OmniClass-nummer23-19 11 00
  • OmniClass-tittelInformation Display Specialties
  • CSI UniFormat II kodeD3060
  • CSI UniFormat II tittelControls and Instrumentation
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit