Ved å bruke våre tjenester, godtar du vår bruk av cookies her !

Godta
;

AHPA-250 Air Source Heat Pump

Unik ref.: aosmith-AHPA-250
Merke: A. O. Smith
Produktfamilie: Split Systems Heat Pump
Produktgruppe: Air source
Vidde / Bredde (Tommer): 55
Høyde (Tommer): 70
Dybde (Tommer): 85
Dato for publisering: 2020-07-29
Versjon nummer / utgave nummer: 2
Skriv: Presentasjon (modell)
Last ned (1)

The A. O. Smith AHPA-250 is an air-to-water heat pump water heater designed to be an energy-efficient, zero-emissions solution for your commercial water heating needs.

Features

  • Heating capacity to 272,450 BTU/h
  • Heats water to 160° F.
  • Cooling capacity to 218,000 BTU/h
  • Double wall condenser for potable water
  • Environmentally friendly R-134a refrigerant
  • Approved for installation indoors or outdoors
  • BACnet compatible with optional control




.

SUGGESTED SPECIFICATION

The HEAT PUMP shall be A. O. Smith Model AHPA-250 having a heating capacity capable of 272,450 BTU/h and cooling capacity of 218,000 BTU/h.
The HEAT PUMP shall have a reciprocating compressor, factory charged with R134a refrigerant, NSF61-approved stainless steel circulator pump, and double-wall stainless steel condenser for potable water applications. The HEAT PUMP shall have a factory coated evaporator coil. The complete heat pump assembly shall carry a one (1) year limited warranty.
The HEAT PUMP refrigerant circuit shall contain an adjustable thermal expansion valve, receiver, accumulator, serviceable filter drier and service ports for refrigerant gauges.
The HEAT PUMP shall be certified and listed by TUV to CSA C22.2 No. 236:2015, UL 1995:2015-07 standards. The HEAT PUMP shall be certified for indoor and/or outdoor installation.
The HEAT PUMP shall be constructed with a heavy gauge aluminum jacket assembly and painted on both sides.
The HEAT PUMP shall utilize a 24 VDC control circuit and components. The control system shall have a display (PLC Option) for HEAT PUMP set-up, HEAT PUMP status and HEAT PUMP diagnostics. All components shall be easily accessed and serviceable. The HEAT PUMP shall be equipped with low and high refrigerant pressure switches short-cycle control outlet water temperature sensor and return water temperature sensor.
The HEAT PUMP shall have an optional control for “Cascade” to sequence and rotate while maintaining operation of up to eight HEAT PUMPs of same BTU inputs.
The HEAT PUMP shall be capable of controlling a valve (single pass option) that maintains constant delivery temperature to the storage tank. The HEAT PUMP shall have an optional gateway device which will allow integration with BACnet.

The HEAT PUMP shall be equipped with terminal strips for electrical connections. A low voltage connection board shall have connection points for safety and
operating controls, i.e., alarm contacts, runtime contacts and tank thermostat. A high voltage terminal strip shall be provided for supply voltage connection. Supply
voltage shall be 208-230V/3PH/60Hz, 440-480V/3PH/60Hz, or 575V/3PH/60Hz.
The HEAT PUMP shall be suitable for use with polypropylene glycol, up to 50% concentration. The de-rate associated with the glycol will vary per glycol manufacturer.
STANDARD CONSTRUCTION
The HEAT PUMP shall be constructed in accordance with the code requirements as standard equipment.  



Hoved materialet : Steel
Sekundært materiale:
Designet i: United States
Produsert i: United States
Vekt Net (Lbs): 1.24

BIMobject Kategori: VVS - Water heaters
IFC klassifisering: Electric Appliance
Uniclass 2015 Kode: Pr_60_60_96
Uniclass 2015 Beskrivelse: Water heaters
CSI MasterFormat 2014 Code: 22 33 36.16
CSI MasterFormat 2014 Title: Commercial Storage Electric Domestic Water Heaters
OmniClass-nummer: 23-31 29 00
OmniClass-tittel: Hot Water Heaters
Dette produktet er tilgjengelig i:
North America
  • Anguilla
  • Antigua and Barbuda
  • Aruba
  • Barbados
  • Belize
  • Bermuda
  • British Virgin Islands
  • Canada
  • Caribbean Netherlands
  • Cayman Islands
  • Collectivity of Saint Martin
  • Costa Rica
  • Cuba
  • Curaçao
  • Dominica
  • Dominican Republic
  • El Salvador
  • Greenland
  • Grenada
  • Guadeloupe
  • Guatemala
  • Haiti
  • Honduras
  • Jamaica
  • Martinique
  • Mexico
  • Montserrat
  • Nicaragua
  • Panama
  • Puerto Rico
  • Saint Kitts and Nevis
  • Saint Lucia
  • Saint Pierre and Miquelon
  • Saint Vincent and the Grenadines
  • Saint-Barthélemy
  • Sint Maarten
  • The Bahamas
  • Trinidad and Tobago
  • Turks and Caicos Islands
  • U.S. Virgin Islands
  • United States

BIMobject®