Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier

    Santa-Fe Ultra70 Whole House Ventilating Dehumidifier

    The Santa-Fe Ultra70 is the first compact, high-efficiency, whole house ventilating dehumidifier designed to fit in tight, low-clearance applications.

    Ideal Applications

    • Basements
    • Crawl spaces
    • Garages
    • Home theaters
    • Workshops
    • Gun rooms
    • Exercise rooms
    • New home
    • Whole home
    • Ventilation
    • Commercial


    The Santa-Fe Ultra70 removes up to 70 pints per day, exceeds Department of Energy standards and provides effective air filtration (MERV-13). The Santa-Fe Ultra70 is ideal for a small home, condo, or apartment applications.

    The Santa-Fe Ultra70 has an innovative cabinet design that easily converts to either vertical or horizontal airflow discharge which allows for easier installation in tight spaces. Flexible airflow configurations allow the Santa Fe Ultra70 to be installed in locations where other dehumidifiers don’t fit due to duct issues and size constraints.

    Optional fresh outdoor air may be ducted to the unit via a “T” to the inlet duct. This provides fresh air to dilute pollutants and maintain a normal oxygen content in the air. The amount of fresh air ventilation can be regulated by a variety of dampers and controls.

    Spesifikasjon
      • Part Number: 4044100
      • Pint Capacity: 70 pints / 8.75 gallons @ 80°F and 60% RH
      • Power: 492 watts @ 73°F and 60% RH
      • Supply Voltage: 115 volt – 1 phase – 60 Hz
      • Current Draw: 4.1 amps @ 73°F and 60% RH

      Blower

      • 150 CFM @ 0.0" WG
      • 140 CFM @ 0.2" WG
      • 130 CFM @ 0.4" WG
      • Average Sound Level: 55.3 dBA

      Operating Temperature

      • 49°F min., 95°F max. (inlet air temperature)
      • 34°F min., 135°F max. (outside cabinet)
      • Control Type: Onboard controls with low voltage terminal block
      • Sizing: Up to 1,800 sq. ft.

      Performance at 80°F and 60% RH

      • Water Removal: 70 pints/day
      • Efficiency: 5.5 pints/kWh

      Performance at 73°F and 60% RH

      • Water Removal: 52.45 pints/day
      • Efficiency: 4.31 pints/kWh

      Air Filter

      • MERV-13 filter
      • Size: 11.38"W × 9.00"H × 0.75"D
      • Part Number: 4037724
      • Unit Dimensions: 12"W × 12"H × 28"D
      • Unit Weight: 55 lbs.
      • Shipping Dimensions: 15"W × 16"H × 31"D
      • Shipping Weight: 65 lbs.
    Tekniske spesifikasjoner
    • Unik ref.santa-fe-ultra70-whole-house-ventilating-dehumidifier
    • ProduktfamilieDehumdification
    • ProduktgruppeWhole House Dehumidifiers
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2026-04-06
    • Utgavenummer1
    Relatert
    • HovedmaterialeMetall
    • Designet iUSA
    • Produsert iUSA
    Klassifisering
    • BIMobject kategoriVVS - Mekanisk ventilasjon
    • Uniclass 2015 kodePr_65_67_39
    • Uniclass 2015 beskrivelseHumidifiers and dehumidifiers
    • CSI MasterFormat 2014 kode23 84 16
    • CSI MasterFormat 2014 tittelMechanical Dehumidification Units
    • OmniClass-nummer23-33 27 13
    • OmniClass-tittelDehumidifiers

    Tilgjengelighet etter region

    Nord Amerika
    Anguilla
    Antigua og Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Cayman Islands
    Costa Rica
    Cuba
    Curaçao
    Den dominikanske republikk
    Dominica
    El Salvador
    Grenada
    Grønland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Jomfruøyene
    Jomfruøyene
    Karibisk Nederland
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts og Nevis
    Saint Lucia
    Saint Pierre og Miquelon
    Saint Vincent og Grenadinene
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad og Tobago
    Turks- og Caicosøyene
    USA
    Common.Footer.ValueProp.Image.AltText

    Design App for Revit

    Last inn familier direkte i Revit-modellen din med ett klikk

    Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

    • Huk avArbeid direkte med BIM-objekter ved siden av Revit
    • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
    • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit